[sdiy] 4-channel ARM-based CV processing project

[brian.walker890 at ntlworld.com]

Hi Eric

(Yeah - it's cardboard. So?)

Some of my best panels were cardboard translating them into metal somehow lost something

And they have alrady been recycled once turn them into compost that will be twice

Save the world. Pave the planet.

Brian

PS: Nice project


> 
> From: Eric Brombaugh <ebrombaugh1 at cox.net>
> Date: 2008/06/09 Mon AM 12:17:20 GMT
> To: sdiy <synth-diy at dropmix.xs4all.nl>
> Subject: [sdiy] 4-channel ARM-based CV processing project
> 
> Hi Gang,
> 
> I've been working on a little project to apply an ARM microprocessor to 
> control voltage mangling. I've got some preliminary hardware and 
> software running and a (very) short write-up on my website:
> 
> http://members.cox.net/ebrombaugh1/synth/armfun/index.html
> 
> It's still in the larval stage - software is just starting to work and 
> the hardware needs a bit of calibration, as well as nicer mechanicals. 
> I'll post more details as it comes together.
> 
> This is my first project done on a PCB I designed. Big thanks to John 
> Luciani and the rest of the gEDA gang for the for the great software & 
> libraries I used to do the board layout. I had it fabbed at BatchPCB 
> (aka SparkFun) and they did a great job with about 2.5wk turnaround.
> 
> Eric
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 

-----------------------------------------
Email sent from www.virginmedia.com/email
Virus-checked using McAfee(R) Software and scanned for spam