[sdiy] Aaron's first PCB layout

[mcb, inc.]

On Sat, 7 Jun 2008, Aaron Lanterman wrote:

> 1) To avoid using jumpers, I run a signal line between the MOTM style ground 
> pins. So this requires that the user be sure to apply ground to both pins. 
> I'm not sure if that's good practice or not.

I don't know what the circuit is and I don't see the signal line but
I believe this would set off alarm bells among a lot of board
designers.  The signal return path for some number of signals
might all be through this 'signal' line.

--
Monty Brandenberg