[sdiy] PLD/GAL programmer?

[Jim Patchell]

I have purchased Needham programmers in the past.

http://www.needhams.com/

However, that link appears to be DEAD...so, it looks like that 
suggestion might not be a good one...I have an EMP-20, which cost me 
about $400 that programs both pals and proms.

Another good suggestion is the Xilinx XC9536.  You can get it in a PLC44 
package, it is equiv to about 4 22V10s, and it is JTAG programable...(in 
circuit).  Runs on 5 volts...(a 3.3 volt version is also availiable). 
It is possible to pick up a JTAG cable for about $25, and the software 
from Xilinx is FREE!.  Get the cable from http://www.digilentinc.com/

http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-USB&Nav1=Products&Nav2=Cables

https://www.digilentinc.com/Cart/Cart.cfm?Nav1=Cart

-Jim

Tom Arnold wrote:
> Anyone have a recommendation on a simple/cheap/good GAL/PLD programmer?  In
> particular I need to program some ATF22V10's but wider-range is perfectly
> acceptable.
> 

-- 
----------------------------------------------
Visit http://www.noniandjim.com
SDIY: http://www.noniandjim.com/Jim/index.html
----------------------------------------------