[sdiy] (MOTM style) DRILLING TEMPLATE/GUIDE??? ready to start makng better looking panels

[Paul Schreiber]

On the TECH section of my site there are some PDF files (NOT 1:1, though) 
that will give dimensions for the holes and typical spacings used on MOTM 
panels.

Paul S.

----- Original Message ----- 
From: "Dan Snazelle" <subjectivity at hotmail.com>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Saturday, July 19, 2008 10:12 AM
Subject: [sdiy] (MOTM style) DRILLING TEMPLATE/GUIDE??? ready to start makng 
better looking panels




I am working with a large front panel. I want to trace out a bunch of pots 
and toggles.
I dont know if there is a program for doing this or if there are templates 
somewhere i can download that i can lay on top of my panel and then drill or 
make marks?

How do you all do this??

I have been just eyeing it for too long... end up with crooked pots, not 
enough finger room, and other problems like things not fitting and ending up 
with too many holes.

I am ready to do this right.

I want to use the larger spacing of MOTM ...it doesnt need to adhere to that 
standard but i want to leave more room than FRAK allows. bigger knobs,etc.


thanks for any advice.










--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc


http://www.soundclick.com/lossnyc.htm


http://www.indie911.com/dan-snazelle
(or for techno) http://www.myspace.com/snazelle


> Date: Sat, 19 Jul 2008 15:48:08 +0100
> From: cheater00 at gmail.com
> To: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy] Brain filling in fundamental
>
> Andre,
> so you're saying this is merely a mechanical impedance mismatch?
> Same reason why the rotary woofer works as well as it does?
>
> Best regards,
> Damian
>
> On Sat, Jul 19, 2008 at 8:22 AM, Andre Majorel  wrote:
>> On 2008-07-16 20:47 +0100, cheater cheater wrote:
>>
>>> Isn't it that under a certain frequency certain to the object in
>>> question objects will stop vibrating at the fundamental but
>>> still 'pretend' to vibrate? Excuse my terrible language here,
>>> I'm not even sure how to explain this properly. I do believe
>>> that this is a less or more known phenomenon...
>>>
>>> Isn't that why electric bass guitars sound this 'harsh'
>>
>> Harsh ? When unamplified, you mean ?
>>
>>> - because the guitar body itself would have to be much larger to
>>> 'house' the fundamental?
>>
>> It's the string that oscillates. The body just follows, and a
>> small body can be made to vibrate at 41 Hz, or 0.00041 Hz for that
>> matter, just as well as a large body.
>>
>> The problem is that the "diameter" of the small body is small
>> compared to the wave length of 41 Hz in air (8.3 m) and as a
>> result, it is not good at making the air around it vibrate at that
>> frequency.
>>
>> Now, if you place your head against the body of an electric bass,
>> you'll hear a very strong fundamental. Making contact with the
>> body eliminates the impedance mismatch at the body-air interface.
>>
>> --
>> André Majorel
>> Do not use this account for regular correspondence.
>> See the URL above for contact information.
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy