[sdiy] modding for LFO retrigger

[cheater cheater]

I suggest you guys take a look at the Midibox project.
It has midi input capability and can output such a trigger pulse, I
believe there are code examples for this. You would have to download
MIOS and write your own 'MIOS application'. Dig deep enough in the
forums and thou shall find.

Cheers

On 7/16/08, floppy <floppyscratcher at googlemail.com> wrote:
> hello mark
>
>
>  thats very simmilar of what i am trying to do with a ms10 since a while.
>  and when i had a vermona drm1mk2 i wanted to add retriggering of the
>  oscilators at note on (this is now added in the mk3)
>  anyway the guys at vermona where very helpful, you should write them about
> the perfourmer.
>
>
>
>  Mark Rivera schrieb:
>
>
> >
> > General question since I have only general knowledge about the intended
> target LFO..
> >
> > Are all LFOs topologies designed such that poking a particular place in
> them with 0V or 5V (or similar) will cause them to retrigger (i.e., reset
> the cycle)?
> >
> > Target synth is a Vermona Perfourmer, which has four monosynths with
> free-running LFOs. I'd like to be able to retrigger the LFO on one or two of
> them to implement a sort of MIDI-hard-sync'd LFO.
> >
> > I thought maybe this could be achieved by adding a small PIC-based
> sub-circuit which would add a second MIDI input listening for clock ticks,
> and a switch for selecting 16th/8th/4tr or similar retrig times. Retrig
> would be affected via a DG403 analog switch (?).
> >
> >
> > cheers,
> > Mark
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> >
> >
>
>  _______________________________________________
>  Synth-diy mailing list
>  Synth-diy at dropmix.xs4all.nl
>  http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>