[sdiy] Re: [AH] totally insane!! system 700 sequencer

[Steve Ridley]

> So what about leave them a low voltage at note off for glowing a 
> littlebit and give them full voltage at note on. So the filament would 
> not cool down too much.


Using a slightly lower voltage lamp and a suitable resistor to
limit the peak (switch on) current has always worked for me.

OTOH, TruOpto (and others) do some nice LED clips which look
close enought to a T1 lampholder to satisfy most people.

http://www.truopto.com/Lensmountsfor3or5mmLEDs.html


Steve