[sdiy] FS: Partially Populated Soundlab Minisynth PCB

[peter edwards]

I built a sound lab modular style with banana ins and outs for each  
module. It's pretty awesome. added some more models based on the  
sound lab schematics. It's really a lot of fun to play wit. check out  
pics and sounds here:
http://casperelectronics.com/finished-pieces/mini-modular-sequencer/
-pete
On Jul 8, 2008, at 11:20 PM, Ian Smith wrote:

>
> I myself am currently using a Soundlab board as the basis for a  
> patchable. I'm also adding in one of Ray's Dual VCAs and one of his  
> VCFs as well as a couple other modules and cramming it all into an  
> ammo box. 14 modules. It should be fun once it's done.
>
> -Ian
>
> ----------------------------------------
>> Date: Tue, 8 Jul 2008 16:27:59 -0700
>> From: nicolas3141 at yahoo.com.au
>> Subject: Re: [sdiy] FS: Partially Populated Soundlab Minisynth PCB
>> To: synth-diy at dropmix.xs4all.nl
>>
>> Hey Kyle,
>>
>> Why not build it with modular style panel wiring?  Look at the ASM  
>> for a good example of multiple modules on one board that can be  
>> wired up as a patched synth or as a modular or any kind of  
>> normalised in-between.  The soundlab can do the same.  Its an  
>> affordable way of getting a whole grab-bag of basic modules.
>>
>> I have a soundlab pcb that when I get around to building it will  
>> sit behind a big rack panel and look like half a dozen discrete  
>> modules.  At least one of the VCOs will probably get a bigger  
>> timing cap as I would rather have more LFOs.
>>
>> Just a suggestion.
>>
>> Cheers,
>> Nicolas
>>
>>
>> --- On Tue, 8/7/08, Kyle Stephens  wrote:
>>
>>> From: Kyle Stephens
>>> Subject: [sdiy] FS: Partially Populated Soundlab Minisynth PCB
>>> To: synth-diy at dropmix.xs4all.nl
>>> Received: Tuesday, 8 July, 2008, 5:20 PM
>>> Ahoy all...
>>>
>>> No one seemed interested on the Electro-Music forum, so
>>> here I am.
>>>
>>> I've decided to go in a slightly different direction
>>> with synth exploits, so I'm finding the Minisynth not
>>> longer what I'm going for (I want to do discrete
>>> modules now). This leaves me however, with a ~80% completed
>>> board. So, any takers?
>>>
>>> All ICs are installed, with sockets. Most of the resistors
>>> are in place, and a few caps are in there (sans the
>>> electrolytic power supply caps, everything else is ceramic
>>> though - you may want to change them as needed to mylar or
>>> otherwise), and precision resistors are used where called
>>> for in the VCOs. I got a pair of SSM2210 precision matched
>>> pair arrays for the VCO expo converters as well, as I was
>>> going to install them on a separate daughterboard, with the
>>> tempcos (also included; 2% 2Ks from Magic Smoke Electronics)
>>> doped against the matched pair ICs with thermal compound and
>>> sealed with epoxy.
>>>
>>> $65 plus S&H and it's yours. Ray charges $35 for
>>> the stock board; on mine there's more than $30 in
>>> parts, let alone labor.
>>>
>>> I'll ship anywhere. It's on your dime though.
>>>
>>>
>>> Hit me up on my main email, K2com at aol.com if you're
>>> interested, want pictures, etc.. Paypal only please!
>>>
>>>
>>> _Kyle
>>>
>>>
>>>
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>>
>>       Start at the new Yahoo!7 for a better online experience.  
>> www.yahoo7.com.au
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _________________________________________________________________
> Use video conversation to talk face-to-face with Windows Live  
> Messenger.
> http://www.windowslive.com/messenger/connect_your_way.html? 
> ocid=TXT_TAGLM_WL_Refresh_messenger_video_072008
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy