[sdiy] TR606 'Individual Outs' Jacks...

[Altitude]

There are a bunch that will work, I used 3.5mm open frame, normally closed
ones so the instrument would be taken out of the mix out when a connected.
There is not a whole lot of space to work with so make sure you make some
measurements to make sure that what you get will fit.

-alt

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of James Elliott
Sent: Monday, January 07, 2008 9:20 AM
To: synth-diy at dropmix.xs4all.nl
Subject: [sdiy] TR606 'Individual Outs' Jacks...

I would like to perform the individual output mod on my tr606 and I was
curious as to what model jacks people were using.

 

Specifically, I am looking for mouser/allied part numbers or manufacturer
name & model info. I checked the archives and I was unable to find this
information.



Thanks,

Jim







 
____________________________________________________________________________
________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.
http://tools.search.yahoo.com/newsearch/category.php?category=shopping
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy