[sdiy] TR606 'Individual Outs' Jacks...

[Seb Francis]

There's actually enough sockets already on the TR606 if you don't mind 
sacrificing the run/stop, trigger outs & headphone out sockets.

I have mine wired:
Run/Stop - SD
LT trig out - Toms
HT trig out - CY
Headphone - Hats

The main output is still the mix of all but since all the above are 
wired pre-volume-pot, with all the pots except BD turned down the main 
out becomes the dedicated BD output.

Here's a pic...
http://burnit.co.uk/sdiy/index.php?page=drumbox
(the extra D-socket is just used for external triggering - there are 
spare pins so I guess I could have also used it for audio out but I 
added this socket afterwards)

Seb



James Elliott wrote:
> I would like to perform the individual output mod on my tr606 and I was curious as to what model jacks people were using.
>
>  
>
> Specifically, I am looking for mouser/allied part numbers or manufacturer name & model info. I checked the archives and I was unable to find this information.
>
>
>
> Thanks,
>
> Jim
>
>
>
>
>
>
>
>       ____________________________________________________________________________________
> Looking for last minute shopping deals?  
> Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>