[sdiy]: a good panel partner for Analog Shift Register

Anthony Rolando goldenechos at hotmail.com
Tue Jan 1 18:27:12 CET 2008


I agree, extra in/ outs is very useful. I have added an extra in. Might do extra outs for 1 or 2 ... still plenty of room for more though!

Tony

----------------------------------------
> From: tensiontype at hotmail.com
> To: synth-diy at dropmix.xs4all.nl
> Subject: Re: [sdiy]: a good panel partner for Analog Shift Register
> Date: Mon, 31 Dec 2007 20:15:54 +0100
> 
> I would always stick multi mergers in every gap there is. Even if it's only 
> one spare spot for a jack it would be used to give an extra output. Can 
> never have too many mergers on a decent sized synth, for me it was more 
> valuable than an extra filter or osc.
> 
> 
> ----- Original Message ----- 
> From: "Anthony Rolando" 
> To: 
> Sent: Monday, December 31, 2007 7:53 PM
> Subject: [sdiy]: a good panel partner for Analog Shift Register
> 
> 
>>
>> I have one of Ken Stone's Analog Shift Registers. I made a Frac Panel 
>> layout for it, but there is plenty of room for features or even another 
>> small circuit.
>>
>> I already added an additional input to the shift register (for feedback or 
>> mixing cvs at the input). I have about half of the 1U Frac panel open.
>>
>> My initial idea was to put a simple OR circuit in there so that I could 
>> mix clock/ trigger/ gate signal to feed the ASR (having that normalled to 
>> the clock input on the ASR).
>>
>> Any other suggestions? Features to add to the ASR or circuits that would 
>> be useful with the ASR?
>>
>> I have never used an ASR so I really have few ideas what might be good to 
>> include.
>>
>> Thanx,
>>
>> tony
>> _________________________________________________________________
>> Share life as it happens with the new Windows Live.
>> http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_122007
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
_________________________________________________________________
Get the power of Windows + Web with the new Windows Live.
http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_122007



More information about the Synth-diy mailing list