[sdiy] Finished my synth at last

[JH.]

Very beautiful woodwork!

JH.


----- Original Message ----- 
From: "ASSI" <Stromeko at nexgo.de>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, February 19, 2008 7:44 PM
Subject: Re: [sdiy] Finished my synth at last


On Dienstag 19 Februar 2008, Gustav Andersson wrote:
> Hi, I'm mostly lurking on this list but I build stuff too :) I put
> together a page with pictures and info on the semi modular synth I've
> been working  for a few years and recently finished.
> http://www.etek.chalmers.se/~gusand/synth/

Words fail me... this is such a nicely built and professional looking 
synth.  You will doubtlessly enjoy it for years to come.

One tip for the woodwork of the next one (I have picked that one up from 
my neighbour, who is a cabinet maker): the secret to getting the right 
angles right is to fix the frame diagonally with two braces of exactly 
the same length and a cutout where they cross for mounting.  You will 
never have to measure or correct a right angle again.  The braces are 
normally removed after the glue has set, but you can make them part of 
the construction for extra strength.


Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk]>+

SD adaptation for Waldorf microQ V2.22R2:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy