[sdiy] Error on the SoundBite board!

[paul.maddox.mail-list at synth.net]

Paul,

 Which Rev board do you have? Mine is blue and labeled revision 1.0.

 For the life of me, I cannot find R21 (R20 is next to the crystal), can
you give me a clue where R21 is?

Paul

> There are 2 0805 resistors on the SoundBite board that are *incorrect*.
>
> These will cause the on-board 24.576Mhz crystal oscillator to output
> incorrect and/or highly jittered clocks.
>
> R20 was 100K change to 1M
>
> R21 was 1K, change to 100ohms.
>
> Took me about 3min to swap out, now it works perfectly.
>
> Paul S.
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>