[sdiy] Frequency Shifter FS-1A update

[Thiemo Nordenholz]

> ------- Original Message -------
> From: "JH." <jhaible at debitel.net>
> To: synth-diy at dropmix.xs4all.nl, "analog heaven" <analogue at hyperreal.org>, "MOTM List" <motm at yahoogroups.com>
> Sent: 3.2.08, 23.08
> Subject: [sdiy] Frequency Shifter FS-1A update
> 
> Hi,
> 
> this is for all who have asked about the status of my Frequency Shifter 
> project:
> 
> I've just made a major update here:
> http://www.jhaible.heim.at/fs1a/fs1a.html
> 
> I plan to release this after the Krautrock Phaser PCBs are all sent out.
> 
> Right now, I want to find out how many of you are still interested in the 
> Frequency Shifter project, now that you see how complex it is.
> :)
> It'll be my most difficult project so far. Take a look at the schematics, 
> and if this doesn't frighten you away, please get back to me. (I certainly 
> don't want to sell a lot of boards that will be thrown away unused or 
> half-built, or built and not adjusted.)
> Pricing will be like my previous PCBs, only that you need *two* PCBs for 
> each frequency shifter; that's 54 EUR + shipping.
> 
> If you're still interested, please send me a mail - I want to find out if 
> I'd get enough orders to get both of these PCBs made in quantities without 
> committing commercial suicide. (It will take a couple of months before these 
> boards will be ready for shipping, but I need pre-orders now.)
> 
> If still interested, please send me a mail in the following form (fill in 
> the number or text in [] brackets):
> 
> =================================================================================
> 
> Email subjet line:  "FS1A PCB order [n] sets of boards"
> 
> =================================================================================
> 
> Email text:
> 
> I'm ordering [n] sets of 2 PCBs for the JH FS-1A Frequency Shifter project 
> for EUR 54.00 per set of boards,
> plus EUR 8.00 for shipping and handling per order.
> 
> This is a binding pre-order that allows you to have a PCB manufacturing run 
> done; OTOH it's possible that the whole project will be cancelled in case 
> there will be not enough orders. (I won't have to pay anything in that case, 
> of course.)
> 
> I know that this is a difficult project, and that I'm just buying the PCBs, 
> and not a guarantee to build a working frequency shifter.
> I have acess to an oscilloscope for the necessary adjustments.
> 
> My adress is:
> 
> [Full shipping adress, as it will appear on the envelope for sending you the 
> PCBs]
> 
> My paypal adress is:
> 
> [your paypal adress]
> 
> ========================================================================================
> 
> 
> Looking forward to hear from you,
> 
> and don't forget the email subject line with the number of PCB *sets* (1 Set 
> = 2 boards = EUR 54.00)
> 
> JH.
> 
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>