[sdiy] Frequency Shifter FS-1A update

[JH.]

Hi,

this is for all who have asked about the status of my Frequency Shifter 
project:

I've just made a major update here:
http://www.jhaible.heim.at/fs1a/fs1a.html

I plan to release this after the Krautrock Phaser PCBs are all sent out.

Right now, I want to find out how many of you are still interested in the 
Frequency Shifter project, now that you see how complex it is.
:)
It'll be my most difficult project so far. Take a look at the schematics, 
and if this doesn't frighten you away, please get back to me. (I certainly 
don't want to sell a lot of boards that will be thrown away unused or 
half-built, or built and not adjusted.)
Pricing will be like my previous PCBs, only that you need *two* PCBs for 
each frequency shifter; that's 54 EUR + shipping.

If you're still interested, please send me a mail - I want to find out if 
I'd get enough orders to get both of these PCBs made in quantities without 
committing commercial suicide. (It will take a couple of months before these 
boards will be ready for shipping, but I need pre-orders now.)

If still interested, please send me a mail in the following form (fill in 
the number or text in [] brackets):

=================================================================================

Email subjet line:  "FS1A PCB order [n] sets of boards"

=================================================================================

Email text:

I'm ordering [n] sets of 2 PCBs for the JH FS-1A Frequency Shifter project 
for EUR 54.00 per set of boards,
plus EUR 8.00 for shipping and handling per order.

This is a binding pre-order that allows you to have a PCB manufacturing run 
done; OTOH it's possible that the whole project will be cancelled in case 
there will be not enough orders. (I won't have to pay anything in that case, 
of course.)

I know that this is a difficult project, and that I'm just buying the PCBs, 
and not a guarantee to build a working frequency shifter.
I have acess to an oscilloscope for the necessary adjustments.

My adress is:

[Full shipping adress, as it will appear on the envelope for sending you the 
PCBs]

My paypal adress is:

[your paypal adress]

========================================================================================


Looking forward to hear from you,

and don't forget the email subject line with the number of PCB *sets* (1 Set 
= 2 boards = EUR 54.00)

JH.