[sdiy] To whet your appetite...

[harrybissell at wowway.com]

Hi Aaron

You should strictly follow a convention of using one layer for
vertical, and another for horizontal. I'd even use a couple more
vias if you need to in order to adhere to the convention. I use
the top layer to go the direction which would allow a trace between
IC pins (I don't do that on the solder side...)

You will avoid getting boxed in, you can clean up in twenty minutes 
later. Its easier if you need to make changes as well.

H^) harry


On Tue, 23 Dec 2008 03:01:10 -0500, Aaron Lanterman wrote
> First person to post to the list what this is gets a free sample 
> board  from my first trial run (i.e. before I build it myself and 
> debug it),  if and when I get around to getting a trial run done. So,
>  think before  you post as to whether you'd want such a thing. ;)
> 
> users.ece.gatech.edu/~lanterma/appetite.png (draft, still tweaking)
> 
> Lordy, that was painful to layout - I scrapped and restarted twice  
> since I kept boxing myself into corners. The others seem to be going 
>  more smoothly.
> 
> - Aaron
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


Harry Bissell & Nora Abdullah 4eva