[sdiy] Washers for 1/8" jacks

[Paul Schreiber]

Ask Mouser to ask Switchcraft what they ship with a 148A jack :)

I *finally* got Mouser to offer Switchraft 1/4" washers as a stock item.

Paul S.


----- Original Message ----- 
From: "Tom Arnold" <xyzzy at sysabend.org>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Monday, December 08, 2008 7:39 PM
Subject: [sdiy] Washers for 1/8" jacks


> Dumb question...  Anyone know of a source for thin washers to go around 
> the
> asian 3.5mm jacks?  Normally I've been buying Kobiconn jacks with washer 
> and
> nut, but they no longer include a washer with it ( although the catalog 
> says
> they do ).  I've been having a nice go-round with Mouser and I'm losing.
>
> They are M6 or 1/4" washers, very thin metal, nickle plated.  Outside
> diameter is around 9.5mm.  The washers that Switchcraft use on their jacks
> are WAY larger so not a good option.
>
> -- 
> -----------------------------------------------------------------
> - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org
> - SynthGeek        -
> - BBD Fanatic      -  "...is it a virus, a drug, or a religion?"
> - echo evho wjxo   -    Juanita Shrugs. "What's the difference?"
> --------------------
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>