[sdiy] Student projects from my Spring 2008 class posted
Aaron Lanterman
lanterma at ece.gatech.edu
Sat Aug 23 10:14:30 CEST 2008
See here:
http://users.ece.gatech.edu/~lanterma/studentprojects
Also, you'll find projects from Fall and Spring 2006. (In the Spring
2008, I relaxed the degree to which the project needed to be novel -
modularizing part of a synth without much modification was sufficient,
since I was awfully busy with a newborn I didn't have time to help
debug in lab as much as I normally would, so I steered them away from
riskier things.)
I would be thrilled if other folks tried building these things and
improving upon these projects. In particular, check out the Sallen-Key
bandpass and highpass filters (a true pure 2nd order S-K highpass, not
a swap-input-and-ground on lowpass S-K like in the MS-20) by Fojas and
Thomas. The designs were inspired by the SSM2040 datasheet, but I
don't recall seeing a real S-K bandpass and highpass actually
implemented before.
Luke's report on the Music Easel timber generator was kinda nice and
had some cool scope plots.
- Aaron
More information about the Synth-diy
mailing list