[sdiy] using off the shelf pcbs in a commercial project

[Justin Owen]

-----Original Message-----
From: Dan Snazelle [subjectivity at hotmail.com]

>its a serious project with about 60 panel controls. 25 toggles, 30 pots 10 rotary pots 6 leds

On a side note - if you're putting this into a box using panel-mounted components - make sure you either leave _lots_ of internal room for all that wire or plan your layout so that the wiring path from panel to board is as efficient as possible.

Even 10 x 1 Pole 12 Way rotary switches is potentially going to need a decent handful of wire.

J