[sdiy] ] Should I use REAL PCBS or ETCHED

[Matthias.Herrmann at jeppesen.com]

dan,

synth-diy-bounces at dropmix.xs4all.nl wrote on 08/15/2008 10:34:59 AM:
> 
> its ok to use other peoples boards in something you are getting paid 
for? 
> i didnt know that
> well i had it all backwards. i thought if you were getting paid you 
> werent allowed to use other peoples boards.

you bought the original PCB, so no problem. you bought knobs, 
potentiometers and you don't mind using them in your product, i bet. same 
applies to a PCB, i think.

> the soundlab board might
> help some of this nonsense. i could probrably ditch my envelope, my 
> vca, one of my lfos (though his lfo is not vc) and use his board for
> those. i havent looked at his board (i have one in a junk box) to 
> see if i could make breakouts but i bet i could.
> 
> hmmm
> 
> he wouldnt mind??

IMO it would always be nice to ask (recommended but not required, i'd 
say). ray is around here, so he might chime in.

matthias
___
www.modular.fonik.de


> > From: pfperry at melbpc.org.au
> > To: synth-diy at dropmix.xs4all.nl
> > Date: Fri, 15 Aug 2008 17:41:27 +1000
> > Subject: [sdiy] ] Should I use REAL PCBS or ETCHED
> > 
> > Well, however you make the boards, here is some advice:
> > Don't try to make just one big board.
> > Break it into logical bits, eg the VCO part, the VCF part etc etc.
> > 
> > And if there already exist boards for some sections - 
> > feel free to use them! ;D
> > 
> > paul perry Melbourne Australia
> > 
> > 
> > _______________________________________________
> > Synth-diy mailing list
> > Synth-diy at dropmix.xs4all.nl
> > http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy