[sdiy] ] Should I use REAL PCBS or ETCHED

[Dan Snazelle]

its ok to use other peoples boards in something you are getting paid for? 
i didnt know that
well i had it all backwards. i thought if you were getting paid you werent allowed to use other peoples boards. the soundlab board might help some of this nonsense. i could probrably ditch my envelope, my vca, one of my lfos (though his lfo is not vc) and use his board for those. i havent looked at his board (i have one in a junk box) to see if i could make breakouts but i bet i could.

hmmm

he wouldnt mind??



--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc  


http://www.soundclick.com/lossnyc.htm


http://www.indie911.com/dan-snazelle
(or for techno) http://www.myspace.com/snazelle 


----------------------------------------
> From: pfperry at melbpc.org.au
> To: synth-diy at dropmix.xs4all.nl
> Date: Fri, 15 Aug 2008 17:41:27 +1000
> Subject: [sdiy] ] Should I use REAL PCBS or ETCHED
> 
> Well, however you make the boards, here is some advice:
> Don't try to make just one big board.
> Break it into logical bits, eg the VCO part, the VCF part etc etc.
> 
> And if there already exist boards for some sections - 
> feel free to use them! ;D
> 
> paul perry Melbourne Australia
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy