[sdiy] BIG PSU ISSUES

[Byron G. Jacquot]

>ok
>i did another test..when (with the load hooked up) i tested at the PSU ITSELF (which is a few feet away from the star board) it gave me a reading of around 14 volts. (this is while i am only getting a reading of 10 or 11 at the load)
>
>so...since the PSU itself is running at 14, i should maybe turn the trimmers back to 12volts so i dont harm the PSU???
>
>
>which voltage matters...the one at the load or at the PSU??

Do you have the "S" terminals of the supply tied to anything?

Byron Jacquot