[sdiy] EH frequency analyzer

[Dan Snazelle]

HEY i found it in colins schematic archive (which was down for a few days so i didnt know it was there!!

thanks all


http://experimentalistsanonymous.com/archives/

--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc


http://www.soundclick.com/lossnyc.htm


http://www.indie911.com/dan-snazelle
(or for techno) http://www.myspace.com/snazelle


> Date: Thu, 7 Aug 2008 09:24:52 -0700
> From: dave.leith at gmail.com
> To: subjectivity at hotmail.com
> Subject: Re: [sdiy] EH frequency analyzer
> CC: synth-diy at dropmix.xs4all.nl
>
> Hi Dan
>
> Check out 
>
> It uses the 1496. It has a preamp for guitar and also will work with
> modular levels. I modified it to either run signal thru it's preamp or
> bypass it. As well I added voltage control with a vacrtrol to change
> the voltage control the frequency of the internal oscillator.
> (Internal oscillator uses a wierd dual pot)
>
> It's a very nice unit designed by Oberheim for Maestro.
>
> Dave
>
>
> On 8/7/08, Dan Snazelle  wrote:
>>
>> anyone have a REAL schematic for this?
>>
>> http://www.flickr.com/photos/11165691@N03/1368821800/
>>
>> i just spent all morning trying to get it to work and was finally told its a fake. it looked real to me. but i did think the 1496 connections looked odd.
>>
>>
>> anyway, i have been hoping this would be good inspiration for a modular synth ring mod that would allow me to use guitar or another vco as the signal in and my vco as the modulator.
>>
>> thanks
>>
>>
>>
>>
>>
>>
>>
>> --------------------------------------------
>> check out various dan music at:
>>
>> http://www.myspace.com/lossnyc
>>
>>
>> http://www.soundclick.com/lossnyc.htm
>>
>>
>> http://www.indie911.com/dan-snazelle
>> (or for techno) http://www.myspace.com/snazelle
>>
>>
>>> From: subjectivity at hotmail.com
>>> To: synth-diy at dropmix.xs4all.nl
>>> Subject: RE: [sdiy] 1496 CAN datasheet??
>>> Date: Thu, 7 Aug 2008 13:49:14 +0000
>>>
>>>
>>> hmmm... i got a old of the 1496 H datasheet...but it doesnt make much sense in the context of the EH frequency analyzer~
>>> they show the SINE WAVE input coming in on the +output!
>>>
>>> maybe this was a way to scare people off
>>>
>>> thanks
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> --------------------------------------------
>>> check out various dan music at:
>>>
>>> http://www.myspace.com/lossnyc
>>>
>>>
>>> http://www.soundclick.com/lossnyc.htm
>>>
>>>
>>> http://www.indie911.com/dan-snazelle
>>> (or for techno) http://www.myspace.com/snazelle
>>>
>>>
>>>> From: subjectivity at hotmail.com
>>>> To: cheater00 at gmail.com; synth-diy at dropmix.xs4all.nl
>>>> Date: Thu, 7 Aug 2008 13:23:11 +0000
>>>> CC:
>>>> Subject: [sdiy] 1496 CAN datasheet??
>>>>
>>>>
>>>>
>>>> i am trying to get some inspiration from the EH freq analyzer but the schematic uses a CAN 1496. i need to make the pin numbers work for a CHIP version so if anyone has any idea where to find the CAN datasheet, or knows the letters you put after the 1496 to signify can, well than, i can look that up too.
>>>>
>>>> thanks
>>>>
>>>>
>>>> anyone built this??
>>>> _______________________________________________
>>>> Synth-diy mailing list
>>>> Synth-diy at dropmix.xs4all.nl
>>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>>
>>> _______________________________________________
>>> Synth-diy mailing list
>>> Synth-diy at dropmix.xs4all.nl
>>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>