[sdiy] IEC inlet with fuse drilling

[cheater cheater]

Dan,
you probably thought about this, but just to be sure, did you check
the white papers for the connector? Most manufacturers have technical
drawings, but not all of them...

Cheers
Damian

On Mon, Aug 4, 2008 at 4:02 PM, GRAHAM ATKINS <gatkins at blueyonder.co.uk> wrote:
> Dan,
>
> Unfortunately there is nothing standard about the panel cut-out. It will
> vary from manufacturer. Your best bet if it is practical is to send the
> connector to your contact so he can measure it up.
>
> Graham
>
> On Aug 4, 2008, at 13:22, Dan Snazelle wrote:
>
>>
>> i am having a guy drill a panel for me. for the AC inlet i am using a
>> standard IEC 3 prong with fuse. However, I dont know how to explain the size
>> of the drill hole.
>> anyone drilled these before and if so, is there a template?
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>