[sdiy] IEC inlet with fuse drilling

[Dan Snazelle]

i am having a guy drill a panel for me. for the AC inlet i am using a standard IEC 3 prong with fuse. However, I dont know how to explain the size of the drill hole.
anyone drilled these before and if so, is there a template?


thanks










--------------------------------------------
check out various dan music at:

http://www.myspace.com/lossnyc


http://www.soundclick.com/lossnyc.htm


http://www.indie911.com/dan-snazelle
(or for techno) http://www.myspace.com/snazelle


> Date: Mon, 4 Aug 2008 13:58:23 +0200
> To: synth-diy at dropmix.xs4all.nl
> From: mr at analogue.org
> Subject: [sdiy] Problem with Tyco PKES knob finish
>
> Hi fellow synth builders,
>
> do you have any experience of the PKES series of bakelite knobs from
> Tyco/Alcoswitch? Here is my dilemma, see the GIF animation:
>
> http://www.analogue.org/mr/sas/tyco-pkes-problem.gif
>
> The sizes PKES120 and PKES70 are normal, but PKES90 and PKES60 have a
> bakelite finish that is uneven and bulging on the top, around the
> metal insert. You can see this in the shiny reflection as the lamp
> moves over the knobs in the animation above.
>
> The result is that they look much uglier and less serious. I've
> bought these knobs from both USA (Newark) and Europe
> (Musikding/Banzaieffects) and there was no difference. Isn't it
> strange to have this defect on SOME of the knobs in a series? And...
> what to do? :-)
>
>
> /mr
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy