[sdiy] Greetings

[Tim Daugard]

From: "Richard Johnson" <richard.e.johnson at gmail.com>

> I had a flash one night of a modular synth with each module
> constructed on the Radio Shack 276-159 circuit board.
>
> http://www.radioshack.com/sm-dual-general-purpose-ic-pc-board--pi-2103799.html
> ) says "Accepts two 6 to 20-pin ICs and DIPs" But I know for a FACT
> you can squeeze 2 4-pin DIPs on there! Op Amp and NAND gate anyone? Am
> I nuts? :)


http://home.earthlink.net/~synthfred/chp05c0.htm

This link is my method. I started with the radio shack board, but the holes are too big to
get reliable connections with ICs (and sockets.) I also had problems with solder bridges
with those boards. Radio Shack has a cheaper board that is just as easy to use.

Tim Daugard
AG4GZ 30.4078N 86.6227W Alt: 12 feet above MSL
http://home.sprintmail.com/~daugard/synth.htm
http://home.earthlink.net/~synthfred/h_toctop.htm (Fred's online edition)