[sdiy] one step 909

[Steve Jones]

"I should be able to adjust the number of  
steps by holding down the "last step" and hitting a main key and  
doing this doesn't work"

For this to work you do need to be in pattern write mode. Shift + pattern button (1, 2, or 3) (pattern button will flash to indicate pattern write mode) then select the pattern (1 - 16 main key) that you want to edit. Then hit play, then do the last step procedure.

Steve Jones


-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl on behalf of epk
Sent: Thu 03/04/2008 12:43
To: synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] one step 909
 
based on the 909 manual I should be able to adjust the number of  
steps by holding down the "last step" and hitting a main key and  
doing this doesn't work.  Also tried while holding down shift just in  
case but still no luck.

I've never actually programmed a 909 before and am going just based  
on the manual, so user error suggestions are certainly welcomed!

Thanks!

epk

On Apr 3, 2008, at 2:58 AM, Julian wrote:

> I know youve probably done somthing similar, but 606s can get stuck  
> like this, and its a natural procedure to get back the other 16  
> steps...
>
> On the 606 you have to hold function, and hit the last step button.
>
> Now i know youve probably done whatever needs to be done on the  
> 909, but i thought it was worth mentioning 'just in case' you hadnt...
>
> Julian
>
>
> ----- Original Message ----- From: "epk"  
> <electronicpresskit at gmail.com>
> To: <synth-diy at dropmix.xs4all.nl>
> Sent: Thursday, April 03, 2008 9:11 AM
> Subject: [sdiy] one step 909
>
>
>> Hey all,
>>
>> just swapped out a cpu in a TR-909 and it seems like that fixed a  
>> lot  of problems, however all patterns are only one step long and  
>> I can't  seem to change how many steps there are.  I tried  
>> resetting the ram  but no luck.  Does this sound like a bad ram chip?
>>
>> Thanks,
>>
>> epk
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>
> -- 
> I am using the free version of SPAMfighter for private users.
> It has removed 66543 spam emails to date.
> Paying users do not have this message in their emails.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
>
>

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy