[sdiy] Frac Rack PCB sizes

[Dave Magnuson]

I noticed I made a mistake:

Tom is correct:  Paia is 4.25 clear inside - not the 4.625 I mentioned in my 
previous reply

Dave Magnuson

----- Original Message ----- 
From: "Tom Bugs" <admin at bugbrand.co.uk>
To: <harrybissell at wowway.com>
Cc: <synth-diy at dropmix.xs4all.nl>
Sent: Wednesday, April 02, 2008 3:20 PM
Subject: Re: [sdiy] Frac Rack PCB sizes


> Hi Harry
> Measuring one of the rack cases from Paia -- the vertical distance between 
> mounting rails is 4.25" and the maximum depth into the case is 7".
> Hope that helps!
> Best, Tom
>
> harrybissell at wowway.com wrote:
>> Hello all
>>
>> I'm windering if someone knows the PCB size that will fit
>> in a Frac-Rack, and if there are any fixed mounting hole locations.
>> I'm doing a PCB and I might want to fit it in this format... maybe some
>> extra PCBs will be available ?  No details because with a global
>> audience like this, you would be too expensive to kill afterwards :^P
>>
>> H^) harry
>>
>>
>> Harry Bissell & Nora Abdullah 4eva
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy