[sdiy] Cool panel mount midi socket sources in the US

[Dave Magnuson]

----- Original Message ----- 
From: "David Brown" <davebr at earthlink.net>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Wednesday, September 26, 2007 12:42 PM
Subject: Re: [sdiy] Cool panel mount midi socket sources in the US


>I use the 16HR655 from Mouser.  This is a nickel plated jack with a rear 
>nut.  You can see them in the photos at 
>http://www.modularsynthesis.com/cvs/DJB-CVS_front.jpg
>
> They also make a black matte version but I like the nickel since it 
> matches the 1/4" jacks.
>
> I know this is from Mouser, but I am assuming you mean the cheesy 5 pin 
> connectors with the two screw mounting flange.
>
> Dave


I like those ALOT!

Wish I had seen those earlier... since I ended up using "the cheesy 5 pin 
connectors with the two screw mounting flange" on a few projects already

CRAP!

(a different) Dave