[sdiy] Moog Rogue dissasembly

Ben Stuyts ben at stuyts.nl
Mon Sep 24 04:36:16 CEST 2007

Hi Nick,

On 23 Sep 2007, at 23:38, nick ames wrote:

> I recently got a Moog Rogue off ebay, and it still has the foam  
> inside.
> It came with the service booklet, and the directions for opening it  
> are pretty
> clear, but to remove the board it says "Remove all rotary and slide  
> pot knobs".
> I tried gently pulling on one of them, but it doesn't want to come  
> off.
> How do I remove it? Do I just pull harder and/or wiggle it?

A few months ago I had to do the same thing with a Rogue. The knobs  
(when original) are all push-on types, so you just need to pull harder.

It's a mess, cleaning all that foam gunk. I replaced all the sliders,  
trim pots and switches, and cleaned the rotary pots.


More information about the Synth-diy mailing list