[sdiy] 4017 sequencer

[Jason Proctor]

the 4516 seems to be a popular way of making 16-step cascadeable 
sequencers, too

>howdy,
>
>  to whoever was thinking about making a sequencer with
>4017s, they work pretty good. I recently automated a
>vertical milling machine with one. For muzik though, i
>would SERIOUSLY consider the 4514/74c193 combo. easily
>cascaded, up, down, up/down. I have been considering a
>64 or 96 step version of it except for the cost of
>switches, pots, jacks, etc. You can set it up to flip
>a switch at any 2 points in the sequence and it will
>run back and forth between them until you turn off the
>switches. Or you can add a counter that will do it
>automatically. It's also 16 steps rather than 10, much
>more compatiblewith muzik. Make a 64 step version and
>tou can break it down to 4/16s, 2/32s, or 1/64. Very
>versatile.
>rig
>


-- 
Jase is doing the AIDS ride - to sponsor him visit
http://www.aidslifecycle.org/1674