[sdiy] Connecting power to my power-one psu...

[Julian]

> I take it i use the ac power lugs... I don't want to kill myself. Contacted the support and they send me a few images (ones that i 
> already have).

I havent looked up the model number, but power one devices generallt have multiple input terminals, some of which you bridge, 
depending on your supply voltage.  It should have the details printed on the actual unit itself too?


> I have multiple lugs that i will need to connect to the distro's on this board... not sure where to start with that either.

Power one supplies often have sense terminals that are used to regulate the supply by monitoring the voltage at the far end of the 
run, rather than at the psu end (long cable runs can cause voltage drop)
If your run is only short (as it will be) then bind the sense terminal to the output terminal at the powersupply.  You probably have 
(not including the 5v) 5 terminals  + s+ gnd s- and -  Bind the s+ and s and the s- and -.


Julian 


-- 
I am using the free version of SPAMfighter for private users.
It has removed 16163 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len