[sdiy] Paia Midi/CV - Glide

[Scott]

I am building that, but unfortunately, it does not support the glide
function of the sequencer.  TK says "It doesn't support it yet" so
hopefully in the future it will.

-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Dave Kendall
Sent: Tuesday, November 06, 2007 2:54 PM
To: synth-diy at dropmix.xs4all.nl
Subject: Re: [sdiy] Paia Midi/CV - Glide


On Nov 6, 2007, at 19:22, Scott wrote:
>
> The sequencer I'm building is the Midibox seq.  It's VERY cool for a
> step sequencer.

With an AOUT board, the Midibox SEQ is a *serious* piece of equipment 
for a modular:-) . All sorts of useful stuff can come out of the AOUT 
outputs,  - triggers, gates, CVs , and the analogue outputs are very 
much more flexible than the Paia.
You'll probably still be discovering new tricks years down the line.... 
IMO, get that going and see what it can do for your rig.

Cheers,
Dave

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy