[sdiy] Paia Midi/CV - Glide

[Sam Ecoff]

Hi Drew...


I was actually thinking of suggesting that same thing (actually spent  
nearly an hour going through my past e-mails from Michael Ford as I  
thought I recalled him mentioning how to do that, but couldn't find  
it). So you might run the seq switch's output to a lag processor, but  
how would you gain control over the timing of the individual steps?  
An LFO would provide an equal amount of time for each step, which  
isn't exactly what the original poster had in mind (at least I don't  
think).

Interested to know as I have a Sequential switch....

:-)

Sam E.



On Nov 6, 2007, at 1:55 PM, Dump Static wrote:

> The CGS Sequential Switch can also do this sort of thing (and is a
> little simpler to build!)
>
> Drew
>
>
>>>> Dave Kendall <davekendall at ntlworld.com> 11/06/07 12:58 PM >>>
>
> If your sequencer is an analogue one, you can have glide on or off per
> step, by including a separate set of on/off switches, one for each
> step, that feeds a second gate output . This is then patched into a
> gate-controlled LAG processor, which when patched before a VCO gives
> glide. Thus your sequencer only needs a clock, stop, and start. Glide
> on/off is handled in the sequencer itself.
> A CV controlled portamento could be fun if fed from a bank of pots -
> different glide rates per step.......
>
> The CGS 07 gate sequencer is worth a look at.....
>
> Hope this helps... :-)
>
> cheers,
> Dave
>
> On Nov 6, 2007, at 16:13, Scott wrote:
>
>> Does anyone know if the Paia midi/cv processes midi GLIDE events?
> I've
>> got one, and am building a sequencer that sends midi glide events.  I
>> guess I can figure it out on my own soon enough, but would really  
>> like
>> to know now!!
>>
>> thanks,
>> Scott
>>
>> _______________________________________________
>> Synth-diy mailing list
>> Synth-diy at dropmix.xs4all.nl
>> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>