[sdiy] Paia Midi/CV - Glide

[Dave Kendall]

Another thought - the Paia does give re-trigger pulses in modes 1 and 
6. Retrigger is a brief pulse sent when a new note is played before the 
first one has been released, ie before a note off is sent.
This pulse could be used for switching on legato mode - the Syntechno's 
internal MIDI interface did this for example. This was used to give 
303-like slides.

Overlapping the note ends within your computer or hardware midi 
sequencer would produce this pulse. If positioned right, glide could be 
introduced this way per step, or wherever you want.....
In the Midi2CV8's mode 6 you get from the 8 outputs;

Key CV
Velocity
Gate
Retrigger
Pitch wheel
DIN sync Start/Reset pulse
DIN sync run/stop
DIN sync 24ppqn pulses ( clock)

That might be the most useful mode for you.....

cheers,
Dave



On Nov 6, 2007, at 16:13, Scott wrote:

> Does anyone know if the Paia midi/cv processes midi GLIDE events?  I've
> got one, and am building a sequencer that sends midi glide events.  I
> guess I can figure it out on my own soon enough, but would really like
> to know now!!
>
> thanks,
> Scott
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>