[sdiy] Good 16 bits A/D choice for mono audio recording

[Eric Brombaugh]

Perhaps - in applications where you could possibly detect stepping at 
levels approaching 4ppm.

Of course you might achieve the same thing with a less expensive 
converter and a random dither generator. :)

Eric

Paul Perry wrote:
> I suspect that the fact that the least significant half dozen bits of the
> 24bit converter is lost in noise does not really matter, I expect there
> would be an advantage to have the stepping taken out. 
> 
> Paul perry Melbourne Australia
> 
> -----Original Message-----
> From: synth-diy-bounces at dropmix.xs4all.nl
> [mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of karl dalen
> Sent: Saturday, 26 May 2007 3:06 AM
> To: Eric Brombaugh; synth-diy at dropmix.xs4all.nl
> Subject: SV: Re: [sdiy] Good 16 bits A/D choice for mono audio recording
> 
> Ad has the Aduc series of MCU's some have 24bit sigma-
> delta AD but can these 24 bits in practice be realized? 
> 
> 
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>