[sdiy] Re: Arp Quadra, dead note

[Dave Manley]

Manuals here:

http://www.lazyblueoctopus.com/html/arp.html

-Dave

r wrote:
> Hi everyone,
> 
> I just took some dust off one of my old Arp Quadra.
> I had to de-oxide almost all of the left hand keyboard board.....had
> to make some jumpers too.
> Now everything works fine with the lead synth.
> There's  a dead note, the second F from the left, in the poly and
> string section. It does not sound at all. In the bass and string bass
> mode, this F note only sounds if you hit the key while still holding
> down another key (these are mono sections) but its envelope is much
> shorter. Hitting the F key alone in bass and string bass mode produce
> no sound.
> 
> As I see that this F key works perfectly with the lead synth section,
> I believe there must be something wrong with the freq dividers of the
> instrument.
> Anybody else had a problem loke this one?
> And.......where is it possible to get the servirce manual for this
> synthesizer?.
> Thanks.
> rikk
> 
> 
>        
> ____________________________________________________________________________________Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. 
> http://mobile.yahoo.com/go?refer=1GNXIC
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
> 
>