[sdiy] LF398 and droop

[Michael Ruberto]

I never had much of a droop problem with these when I buffered the output 
with something like a CA3130.
If that solution has been mentioned please disregard - I haven't had time to 
read the whole thread.

M. A. Ruberto


>From: "John Luciani" <jluciani at gmail.com>
>To: "mark verbos" <mverbos at earthlink.net>
>CC: Synth DIY <synth-diy at dropmix.xs4all.nl>
>Subject: Re: [sdiy] LF398 and droop
>Date: Thu, 17 May 2007 16:31:29 -0400
>
>On 5/17/07, mark verbos <mverbos at earthlink.net> wrote:
>>I switched the caps to some polyester ones I had laying around and it
>>looks like the problem is gone.  I also scratched the flux residue
>>off the board. A guard ring isn't really possible now, but it seems ok.
>>
>>Mark
>
>What was the dielectric of the ceramic capacitor?
>
>(* jcl *)
>
>---
>www.luciani.org
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at dropmix.xs4all.nl
>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

_________________________________________________________________
Make every IM count. Download Messenger and join the i’m Initiative now. 
It’s free. http://im.live.com/messenger/im/home/?source=TAGHM_MAY07