[sdiy-interim] FLASH/JTAG based DSP?

[ezion]

Hi
There are some ARM9 parts from ST and others with RAM and FLASH.
ARM9 is a ARM7 with hardware mult and divide plus DSP instructions.
There is a free set of tools from IAR but its limmited to 32k.
The obvious alternative would be the GNU toolchain.

I just started with the ST parts, for now I use the IAR tools. though
the parts themselfs have bigger FLASH than that 32k limmit. Work
around for me might be to install the 30 day full trial on a second
system after 99% of the programming has be done in smaller blocks.


Cheers
Theo (of to the musikmesse for a week)


On 3/25/07, Batz Goodfortune <batzman-nr at all-electric.com> wrote:
> Y-ellow All.
>         Adam and I continued out discussion of the Propeller chip off-list
> given that the list was down. It's probably a bit stale to rekindle that
> thread but it has me wondering.
>
> Is there a DSP that is FLASH based and programmable via JTAG or serial
> port? Basically, a DSP that's as easy to work with as an AVR etc. We've
> never heard of such a thing but that's not to say one doesn't exist. Or
> maybe it's just crap and that's why no-one uses it.
>
> It would help if it were audio-centric and 32 bits wide but even 16 bits
> would be workable. Maybe just an I2C port or some SPI/I2C/serial ports. But
> mainly the ability to program in circuit.
>
> Anything out there?
>
> Thanks in advance.
> Be absolutely Icebox.
>
>  _ __        _    __International Pain-in-the-Ass and prophet of doom__
> | "_ \      | |
> | |_)/  __ _| |_ ____       ALL ELECTRIC KITCHEN
> |  _ \ / _` | __|___ |Your source of Armageddon in a musically crass world
> | |_) | (_| | |_  / /
> |_,__/ \__,_|\__|/ /   Disgusting-> http://all-electric.com
>                 / ,__  Music-> http://all-electric.com/music_downloads.html
> Goodfortune    |_____| Cult  -----> http://www.subgenius.com
>
> _______________________________________________
> This is the interim list for synth-diy at dropmix.xs4all.nl. You are
> getting this email because you have posted to s at d.x.n at least once
> since 2006-01.
> To post, synth-diy at vermine.org
> To unsubscribe, http://vermine.org/cgi-bin/mailman/listinfo/synth-diy
>

_____________________________________________________________________
This is the interim list for synth-diy at dropmix.xs4all.nl.
To post, synth-diy at vermine.org
To unsubscribe, http://vermine.org/cgi-bin/mailman/listinfo/synth-diy