[sdiy-interim] New audio clip of Matrix FX frequency shifting

[JH.]

Six minutes (5.7 MByte of mp3) of playing around with the Matrix FX and
Farfisa VIP500 organ.
The Farfisa's upper manual sound goes thru the phaser (set to Compact A
mode, and modulated by the envelope follower with a large amount of
"Bounce".), and then into two frequeny shifters (downshift on left stereo
channel, upshift on right stereo channel).
The Farfisa's lower manual sound goes thru the diode ladder filter (slightly
modulated by a self-cycling Trapezoid generator), and then into the phaser
(see above). Also, the lower manual feeds the BBD delay, which is mixed to
the center of the stereo output after the frequency shifter.
The whole sound is treated with reverb (Quantec, with a large cathedral
setting).
I've deliberately used a rather thin organ, and not a synthesizer, as input
for the Matrix FX, to demonstrate its sound modifying capabilities.

http://jhaible.heim.at/matrix_fx/jh_matrix_fx_fshift.mp3

JH.


_______________________________________________
This is the interim list for synth-diy at dropmix.xs4all.nl. You are
getting this email because you have posted to s at d.x.n at least once
since 2006-01.
To post, synth-diy at vermine.org
To unsubscribe, http://vermine.org/cgi-bin/mailman/listinfo/synth-diy