[sdiy]CV-Quantizer/Wavetable Osc and static RAM

m.bareille at free.fr m.bareille at free.fr
Mon Jun 25 17:54:05 CEST 2007


Hi Samppa,

Thanks for your anwser :)

Ooopps! So sorry for the crosspost ... As i didn't receive emails i have
posted to the synthdiy list few mins/hours later, i was supposing my email 
didn't work ... but now i know i was wrong !

About Quantix8 releases :

- The prototype is 99% finished, but i have to redraw the pcb before : there was
a nice mistake into the proto board. I plan to have pcbs available for the
middle of September, not before i think ...However complete informations for
this project will be online under a couple of week i think.

- the Quantix pcb is double side, and because of the important number of
'via' holes and density i will  provide a "green" pcb with metalised holes.
Please be aware this will modify completly the way i am usualy dealing pcbs (
etched on order only !). Here i will order a batch of 20/25 pcbs to keep costs
into an affordable range, so when the stock will be empty, there will be no more
pcbs until i get enough orders to run a new batch...

- I think will not charge directly for the software/firmware, this will be
included into the package. In my mind the final price for a complete set
pcb/firmware/software/doc should not exceed 60 euros. And there is approx 60/80
euros of additional classic parts/ics inside.

The Schaeffer Front panel i have drawn for this project cost 50 euros (MOTM 5U)
but you are not obliged to go Schaeffer neither ;)

Being reasonnable , the final cost for this module project should be around
150/200 euros for the normal diyer. Well take care with all those numbers, they
are only estimated!

Cheers,

Marc B.

Papareil Synth Labs
http://m.bareille.free.fr










Selon Samppa Tolvanen <samppa.tolvanen at gmail.com>:

> We hear You -  the messages are getting thru!
>
> Now this is an interesting module. Ok, I'm going to ask this BEFORE
> You're updating the quantix8 page with new information:
>
> When the PCBs (PICs?) are going to be available and how much these are
> going to cost?
>
> Samppa
>





More information about the Synth-diy mailing list