[sdiy] Noisy Power Supply

[Needham, Alan]

Could this be model number HC15-3-A ?
      Floating 15v at 3A, remote sensing ?
        (I can't find anything like 15v 0.8A - what is it ?)

You say the positive side is flat ??? do you mean the 'scope
sees no ripple here, what is your 'scope's reference connected to?

If the second supply is only 0.8A and is running the synth OK,
   why swap?
   is it's output floating?
   is there an earth connection anywhere on the DC supply side?

	Alan, peering out of his cave

#  -----Original Message-----
#  From: synth-diy-bounces at dropmix.xs4all.nl
#  [mailto:synth-diy-bounces at dropmix.xs4all.nl]On Behalf Of Scott
#  Sent: 21 June 2007 5:57 AM
#  To: synth-diy at dropmix.xs4all.nl
#  Subject: [sdiy] Noisy Power Supply
# 
# 
#  ----|/----|/----   Sort of like that.  The positive side was flat.

_____________________________________________________________________
The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).
The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.

Centrica plc

Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD

Registered in England and Wales No 3033654