[sdiy] yusynth sawanimator update

[yves usson]

Hi Phil

I see no objection that someone sells small quantities of PCBs based on 
my design
for the sake of SDIYers community, provided one lets me know it, that 
the price remains as
low as possible,  (concerning the sawanimanator it should not exceed 20 
US$ though) and
that the Yusynth logo and/or my name appear either on the track side or 
on the silk-screen.
Saying that I realize that the PCB of the saw-animator that is on my 
site doesn't contain the yusynth logo...
Also I'd appreciate getting one PCB to check that there is no quirk in it.

Cheers

Yves



Phil Wheeler a écrit :
> It looks interesting, although not as complex as the EN#87 (10) circuit 
> presented by Bernie Hutchins (which would require 8 quad op amps and a 
> dual op amp, or some equivalent combination). I just completed a PCB 
> layout of Yves's design using ExpressPCB. With plated through holes, 
> double sided etching, silk screen, solder mask, etc., the boards would 
> cost from $50 each to about $8 each depending on the quantity ordered (4 
> to 50+). I'm considering such an order. Interested SDIYers should 
> contact me off-list and I'll guage the interest level within a few days. 
> Obviously I won't go for the $50 each option, so a only quantity 
> purchase will make this work. Also, if Yves Usson doesn't want this to 
> happen, he should let me know. I don't intend to make any profit on 
> this, and I don't guarantee that my layout is correct although 
> interested SDIYers are welcome to request a copy for a sanity check 
> (always welcome!). Happy soldering!
>  
> Phil
> 
>  

-- 
Yves Usson

http://yusynth.net
yves.usson at yusynth.net