July 2007 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jul 1 01:53:15 CEST 2007
Ending: Tue Jul 31 23:30:06 CEST 2007
Messages: 554

• [sdiy] +/- 15 Volt converter   Fernando de Izuzquiza
• [sdiy] +/- 15 Volt converter   mark verbos
  • [sdiy] +/- 15 Volt converter   Fernando de Izuzquiza
    • [sdiy] +/- 15 Volt converter   Paul Perry
      • [sdiy] +/- 15 Volt converter   Fernando de Izuzquiza
      • [sdiy] Very fast VCO!   karl dalen
      • [sdiy] Very fast VCO!   René Schmitz
      • [sdiy] tempco resistors   JH.
      • [sdiy] tempco resistors   Mike Wanning
      • [sdiy] tempco resistors   Fernando de Izuzquiza
      • [sdiy] tempco resistors   Louis van Dompselaar
      • [sdiy] tempco resistors   JH.
      • [sdiy] tempco resistors   Oakley Sound
      • [sdiy] serge positive slew & ssg schemo's   Anthony Bisset
      • [sdiy] Re: serge positive slew & ssg schemo's   Anthony Bisset
      • [sdiy] Re: serge positive slew & ssg schemo's &&   Anthony Bisset
      • [sdiy] tempco resistors   David Brown
      • [sdiy] tempco resistors   Samppa Tolvanen
      • [sdiy] Portable cabinet´s lids   Terje Winther
      • [sdiy] tempco resistors   Fernando de Izuzquiza
      • [sdiy] tempco resistors   Takuya Katayama
• [sdiy] archiving info   Roy J. Tellason
• [WARNING - NOT VIRUS SCANNED] Re: [sdiy] message board   jure zitnik
• [sdiy] PPPPPulser redux   Ian Fritz
• [sdiy] Jupiter 6 troubles   Jeff Farr
  • SV: [sdiy] Jupiter 6 troubles   karl dalen
  • [sdiy] Korg KR-55 Trigger Inputs   Doug Terrebonne
    • [sdiy] Korg KR-55 Trigger Inputs   NSSINC
      • [sdiy] Korg KR-55 Trigger Inputs   Doug Terrebonne
      • [sdiy] Korg KR-55 Trigger Inputs   NSSINC
• [sdiy] LM566, SAD1024 and a Paia String synthesizer   Karl Ekdahl
  • [sdiy] LM566, SAD1024 and a Paia String synthesizer   Tom Arnold
  • [sdiy] LM566, SAD1024 and a Paia String synthesizer   Tim Heffield
    • SV: RE: [sdiy] LM566, SAD1024 and a Paia String synthesizer   Karl Ekdahl
      • [sdiy] LM566, SAD1024 and a Paia String synthesizer   Tim Heffield
  • [sdiy] LM566, SAD1024 and a Paia String synthesizer   Bob Weigel
• [sdiy] wanted: Ross Flanger schematics   Todd Sines
• [sdiy] "no minimum order" electronics suppliers?   Todd Sines
  • [sdiy] "no minimum order" electronics suppliers?   Paul Schreiber
  • [sdiy] "no minimum order" electronics suppliers?   Mike Beauchamp
• [sdiy] Tune VCO   Scott
  • [sdiy] Tune VCO   Paul Perry
• [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Florian Anwander
  • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Seb Francis
    • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Florian Anwander
      • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Louis van Dompselaar
      • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Mason
      • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Florian Anwander
      • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Samppa Tolvanen
      • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   René Schmitz
  • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Andre Majorel
  • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Bob Weigel
    • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   BR
  • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Michael Atzert
• [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Needham, Alan
• [sdiy] Mysterious sitings....   Laurie Biddulph
• [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Needham, Alan
• [sdiy] Re: [AH] dont play the Threremin   klosmon
• [sdiy] What does this have to do with synth-diy?   klosmon
  • [sdiy] The list still malfuctions!   karl dalen
    • [sdiy] The list still malfuctions!   Andre Majorel
      • [sdiy] The list still malfuctions!   Ian Fritz
• [sdiy] TH-201 "Mankato" PCBs available   Tim Parkhurst
  • [sdiy] Re: TH-201 "Mankato" PCBs available   Tim Parkhurst
• [sdiy] TH-201   jays at aracnet.com
  • [sdiy] TH-201   Louis van Dompselaar
• [sdiy] Replacement keys for Moog Prodigy   Nicholas Gregorich
• [sdiy] Jupiter 6 troubles   Jeff Farr
• [sdiy] Jupiter 6 troubles   J.D. McEachin
  • [sdiy] Jupiter 6 troubles   John Henson
• [sdiy] ..and so it goes on (more OSCar issues)   Julian
  • [sdiy] ..and so it goes on (more OSCar issues)   Julian
  • SV: [sdiy] ..and so it goes on (more OSCar issues)   karl dalen
• [sdiy]site update : Quantix8, Warp633+guitar soundclips...   m.bareille at free.fr
• [sdiy] The list still malfuctions!   Harry Bissell & Nora
  • SV: Re: [sdiy] The list still malfuctions!   karl dalen
• [sdiy] Minimoog LHC with pitch ribbon   Keith Winstanley
• [sdiy] Minimoog Osc board, last rev   Keith Winstanley
• [sdiy] Tune VCO   Scott
  • [sdiy] Tune VCO   Tom Wiltshire
• [sdiy] Minimoog Osc board, last rev   Keith Winstanley
• [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Colin Hinz
  • [sdiy] WARNING: Potential Adressgrabbing at dropmix.xs4all.nl   Bob Weigel
• [sdiy] Minijacks   Colin Hinz
  • [sdiy] Minijacks   Seb Francis
    • [sdiy] Minijacks   Colin Hinz
      • [sdiy] Minijacks   mcb, inc.
      • [sdiy] Minijacks   Brock Russell
• SV: Re: SV: Re: [sdiy] The list still malfuctions!   karl dalen
  • SV: Re: SV: Re: [sdiy] KD's ultrasonic VCO (hypersonic?)   Dave Manley
    • [sdiy] KD's ultrasonic VCO (hypersonic?)   karl dalen
• [sdiy] Minimoog Osc board, last rev   Keith Winstanley
• [sdiy] Minimoog LHC with pitch ribbon   Keith Winstanley
• [sdiy] DiY Arp2600 clone   David J. Hughes
  • [sdiy] DiY Arp2600 clone   Tim Parkhurst
  • SV: [sdiy] DiY Arp2600 clone   karl dalen
    • SV: [sdiy] DiY Arp2600 clone   Anthony Rolando
  • SV: [sdiy] DiY Arp2600 clone   karl dalen
• [sdiy] Intersil ICL8038?   JAMES GALLANT
  • [sdiy] Intersil ICL8038?   Tim Parkhurst
  • [sdiy] Intersil ICL8038?   Anthony Rolando
  • [sdiy] Intersil ICL8038?   Paul Perry
    • [sdiy] Intersil ICL8038?   Dave Manley
  • [sdiy] Intersil ICL8038?   Aaron Lanterman
• [sdiy] Obscure IC identification   dj hohum
• SV: [sdiy] DiY Arp2600 clone   Needham, Alan
  • SV: [sdiy] DiY Arp2600 clone   Samppa Tolvanen
    • SV: [sdiy] DiY Arp2600 clone   mrmike
    • SV: [sdiy] DiY Arp2600 clone   Anthony Rolando
• [sdiy] Intersil ICL8038?   Aaron Lanterman
• [sdiy] Paging Aaron Cram..........   Dave Kendall
• [sdiy] Frontpanel graphics transfers Lazertran ect.   Samppa Tolvanen
  • [sdiy] Frontpanel graphics transfers Lazertran ect.   Anthony Rolando
    • [sdiy] Frontpanel graphics transfers Lazertran ect.   Samppa Tolvanen
    • [sdiy] Frontpanel graphics, direct toner.   karl dalen
• [sdiy] Paging Aaron Cram..........   Dave Kendall
• [sdiy] CEM3374...who had those again?   Bob Weigel
• [sdiy] Re: serge positive slew & ssg schemo's   Ken Stone
• [sdiy] tempco resistors   jean-pierre.desrochers at ville.quebec.qc.ca
  • [sdiy] tempco resistors   Ray Wilson
    • [sdiy] tempco resistors   Takuya Katayama
  • [sdiy] tempco resistors   Oakley Sound
    • [sdiy] tempco resistors   Paul Perry
    • [sdiy] tempco resistors   JH.
      • [sdiy] tempco resistors   Paul Perry
      • [sdiy] tempco resistors   JH.
• [sdiy] clock Divider   Scott
  • [sdiy] clock Divider   Paul Perry
  • [sdiy] clock Divider   Romeo Fahl
    • [sdiy] clock Divider   Jason Proctor
• [sdiy] clock Divider   Harry Bissell & Nora
  • [sdiy] clock Divider   fmg
• [sdiy] clock Divider   Scott Gravenhorst
  • [sdiy] clock Divider   Roy J. Tellason
    • [sdiy] clock Divider   Jason Proctor
• [sdiy] clock Divider   Scott Gravenhorst
• [sdiy] clock Divider   Roy J. Tellason
• [sdiy] (no subject)   Scott
  • [sdiy] (no subject)   Jason Proctor
• [sdiy] Congratulations, Tom Wiltshire!   Samppa Tolvanen
  • [sdiy] Congratulations, Tom Wiltshire!   Tom Wiltshire
• [sdiy] clock Divider   Scott
• [sdiy] clock Divider - I almost get it.. one more thing..   Scott
• [sdiy] Scanner Chorus pcb interest?   JH.
• [sdiy] Excess Molex Connectors AND Doepfer slider pot question?   dj hohum
• [sdiy] Scanner Chorus pcb interest?   David Brown
  • [sdiy] Scanner Chorus pcb interest?   Mike Beauchamp
• [sdiy] Re Excess molex connectors   dj hohum
• [sdiy] Re: Frontpanel graphics, direct toner.   karl dalen
  • [sdiy] Re: Frontpanel graphics, direct toner.   Jason Proctor
    • [sdiy] Re: Frontpanel graphics, direct toner.   Paul Perry
    • [sdiy] Re: Frontpanel graphics, direct toner.   Mike
  • [sdiy] Re: Frontpanel graphics, direct toner.   Samppa Tolvanen
    • [sdiy] Re: Frontpanel graphics, direct toner.   Anthony Rolando
      • SV: Re: [sdiy] Re: Frontpanel graphics, direct toner.   karl dalen
      • SV: Re: [sdiy] Re: Frontpanel graphics, direct toner.   Dave Manley
      • SV: Re: SV: Re: [sdiy] Re: Frontpanel graphics, direct toner.   karl dalen
      • SV: Re: SV: Re: [sdiy] Re: Frontpanel graphics, direct toner.   Dave Manley
• [sdiy] More free stuff   Neil Johnson
• [sdiy] More free stuff   Scott
  • [sdiy] More free stuff   dj hohum
  • [sdiy] More free stuff   Mark Verbos
• [sdiy] More free stuff   Scott
• [sdiy] Radio Controlled Synth ?   Needham, Alan
  • [sdiy] Radio Controlled Synth ?   Tom Wiltshire
    • [sdiy] THE LM13600/LM13700 STORY   Daniel Araya
      • [sdiy] THE LM13600/LM13700 STORY   Ian Fritz
      • SV: Re: [sdiy] THE LM13600/LM13700 STORY   karl dalen
      • [sdiy]Re: 1 VCO, 2 Qaudrature dem, 1comparator, 1 ref, 1 preamp, 1 lock detector?   karl dalen
      • [sdiy] THE LM13600/LM13700 STORY   JH.
      • [sdiy] THE LM13600/LM13700 STORY   Ian Fritz
      • [sdiy] THE LM13600/LM13700 STORY   JH.
      • [sdiy] THE LM13600/LM13700 STORY   Todd Sines
      • [sdiy] THE LM13600/LM13700 STORY   Ian Fritz
      • [sdiy] THE LM13600/LM13700 STORY   JH.
      • [sdiy] THE LM13600/LM13700 STORY   Ian Fritz
      • [sdiy] THE LM13600/LM13700 STORY   ASSI
      • SV: Re: [sdiy] THE LM13600/LM13700 STORY   karl dalen
      • SV: Re: Re: [sdiy] THE LM13600/LM13700 STORY   karl dalen
      • [sdiy] THE LM13600/LM13700 STORY   JH.
      • SV: Re: Re: [sdiy] THE LM13600/LM13700 STORY   karl dalen
      • [sdiy] THE LM13600/LM13700 STORY   Ray Wilson
      • [sdiy] THE LM13600/LM13700 STORY   Roy J. Tellason
      • [sdiy] THE LM13600/LM13700 STORY   dj hohum
  • [sdiy] Radio Controlled Synth ?   Fernando de Izuzquiza
• [sdiy] Radio Controlled Synth ?   Needham, Alan
  • [sdiy] Radio Controlled Synth ?   Tom Wiltshire
    • [sdiy] Radio Controlled Synth ?   Richard Wentk
      • [sdiy] Radio Controlled Synth ?   Fernando de Izuzquiza
• [sdiy] Radio Controlled Synth ?   Scott
• [sdiy] Radio Controlled Synth ?   Scott
• [sdiy] What is this??   Karl Ekdahl
  • [sdiy] What is this??   fredw at lmi.net
    • [sdiy] What is this??   Mike
      • [sdiy] What is this??   Tom Wiltshire
      • SV: Re: [sdiy] What is this??   Karl Ekdahl
      • [sdiy] What is this??   Donald Tillman
• [sdiy] Next miniPSU PCB batch   Joachim
  • [sdiy] Next miniPSU PCB batch   Ingo Debus
• [sdiy] Paging Emil Helbro   Ray Wilson
• [sdiy] Regelwerk fader   dj hohum
• [sdiy] Regelwerk fader   Brett Maddaford
• [sdiy] Fully assignable sequencer   darky83 at libero.it
  • [sdiy] Fully assignable sequencer   Samppa Tolvanen
  • [sdiy] Fully assignable sequencer   Paul Perry
  • [sdiy] Fully assignable sequencer   Sam Ecoff
• [sdiy] Fully assignable sequencer   darky83 at libero.it
• [sdiy] Fully assignable sequencer   Scott
  • [sdiy] Fully assignable sequencer   Florian Anwander
  • [sdiy] Fully assignable sequencer   Sam Ecoff
• [sdiy] Radio Controlled Synth ?   Needham, Alan
  • [sdiy] Radio Controlled Synth ?   Tom Wiltshire
• [sdiy] clock Divider - I almost get it.. one more thing..   Harry Bissell & Nora
  • [sdiy] 1 VCO, 2 Qaudrature dem, 1comparator, 1 ref, 1 preamp, 1 lock detector?   karl dalen
• [sdiy] Fully assignable sequencer   Scott
  • [sdiy] Fully assignable sequencer   Dave Manley
• SV: Re: Re: [sdiy] THE LM13600/LM13700 STORY   JH.
• [sdiy] Fully assignable sequencer   Ken Stone
  • [sdiy] Fully assignable sequencer   dj hohum
  • [sdiy] Fully assignable sequencer   Pete Swarbrick
• [sdiy] Electronotes?   dj hohum
  • [sdiy] Electronotes?   John Mahoney
  • [sdiy] Electronotes?   Dave Manley
  • [sdiy] Electronotes?   Ian Fritz
  • [sdiy] Electronotes?   KA4HJH
    • [sdiy] Electronotes?   John Mahoney
      • [sdiy] Electronotes?   dj hohum
      • [sdiy] Electronotes?   Seb Francis
• [sdiy] Electronotes?   Ian Fritz
• [sdiy] Fully assignable sequencer   Scott
• [sdiy] Cut Aluminum   Scott
  • [sdiy] Cut Aluminum   Julian
  • [sdiy] Cut Aluminum   Andre Majorel
    • [sdiy] Cut Aluminum   Bruce
    • SV: Re: [sdiy] Cut Aluminum   karl dalen
      • SV: Re: [sdiy] Cut Aluminum   Andre Majorel
      • SV: Re: SV: Re: [sdiy] Cut Aluminum   karl dalen
      • [sdiy] Cut Aluminum   Andre Majorel
  • [sdiy] Cut Aluminum   ASSI
  • SV: [sdiy] Cut Aluminum   karl dalen
  • [sdiy] Cut Aluminum   Tom Arnold
• [sdiy] Cut Aluminum   Ken Stone
  • [sdiy] Cut Aluminum   dj hohum
    • [sdiy] Cut Aluminum   Louis van Dompselaar
      • [sdiy] Cut Aluminum   Paul Perry
      • SV: RE: [sdiy] Cut Aluminum   karl dalen
• [sdiy] 555 adsr   James Dunn
• [sdiy] Thomas Henry's Super Controller Module   Matthias.Herrmann at jeppesen.com
  • [sdiy] Thomas Henry's Super Controller Module   dj hohum
    • [sdiy] Thomas Henry's Super Controller Module   Matthias.Herrmann at jeppesen.com
• [sdiy] Cut Aluminum   JAMES GALLANT
  • [sdiy] Cut Aluminum   John Mahoney
  • [sdiy] Cut Aluminum   Eric Brombaugh
    • [sdiy] Cut Aluminum   Anthony Rolando
      • [sdiy] Mill ,drill,cut aluminium.   karl dalen
      • [sdiy] Mill ,drill,cut aluminium.   dj hohum
      • [sdiy] waveform animator   Scott Juskiw
      • [sdiy] waveform animator   Fernando de Izuzquiza
      • [sdiy] waveform animator   Ian Fritz
• [sdiy] Cut Aluminum   JAMES GALLANT
• [sdiy] using 2 transformers   Antonio Tuzzi
  • [sdiy] using 2 transformers   Dave Magnuson
  • [sdiy] using 2 transformers   Bob Weigel
• [sdiy] Fully assignable sequencer   Dump Static
  • [sdiy] Fully assignable sequencer   John Mahoney
    • [sdiy] Fully assignable sequencer   Mattias Rickardsson
      • [sdiy] Fully assignable sequencer   John Mahoney
      • [sdiy] Fully assignable sequencer   Mattias Rickardsson
• [sdiy] Fully assignable sequencer   Dump Static
• [sdiy] Fully assignable sequencer   Scott
• [sdiy] long delay lines   Derek Holzer
  • [sdiy] long delay lines   Eric Brombaugh
  • [sdiy] long delay lines   Seb Francis
  • [sdiy] long delay lines   Seb Francis
• [sdiy] Fully assignable sequencer   Ken Stone
  • [sdiy] Fully assignable sequencer   John Mahoney
• [sdiy] 8038 XR2206   dj hohum
  • [sdiy] 8038 XR2206   John Mahoney
    • [sdiy] 8038 XR2206   dj hohum
      • [sdiy] 8038 XR2206   Tim Parkhurst
      • [sdiy] 8038 XR2206   Tom Bugs
      • [sdiy] 8038 XR2206   Derek Holzer
      • [sdiy] 8038 XR2206   Tom Bugs
• [sdiy]'plasma' vu-meter   m.bareille at free.fr
  • [sdiy]'plasma' vu-meter   KA4HJH
    • [sdiy]'plasma' vu-meter   Ben Stuyts
      • [sdiy]'plasma' vu-meter   m.bareille at free.fr
  • [sdiy]'plasma' vu-meter   Fernando de Izuzquiza
    • [sdiy]'plasma' vu-meter   m.bareille at free.fr
      • [sdiy]'plasma' vu-meter   Fernando de Izuzquiza
  • [sdiy]'plasma' vu-meter   Fernando de Izuzquiza
  • [sdiy]'plasma' vu-meter   Joe Grisso
    • [sdiy]'plasma' vu-meter   Scott K Warren
    • [sdiy]'plasma' vu-meter   m.bareille at free.fr
• [sdiy] 12 bits D/A converter?   labolida
  • [sdiy] 12 bits D/A converter?   Oakley Sound
  • [sdiy] 12 bits D/A converter?   Stefan
    • [sdiy] Modular FPGA based synth!   karl dalen
      • [sdiy] Voltage controlled FPGA based synth?   Tom Wiltshire
      • [sdiy] Voltage controlled FPGA based synth?   Anthony Rolando
      • SV: Re: [sdiy] Voltage controlled FPGA based synth?   karl dalen
      • SV: Re: [sdiy] Voltage controlled FPGA based synth?   Anthony Rolando
  • [sdiy] 12 bits D/A converter?   Mattias Rickardsson
    • [sdiy] Modular FPGA based synth!   karl dalen
• [sdiy]'plasma' vu-meter   Scott
  • [sdiy]'plasma' vu-meter   Tim Parkhurst
    • [sdiy]'plasma' vu-meter   Mike
• [sdiy] Fully assignable sequencer   Dump Static
• [sdiy] Fully assignable sequencer   Dump Static
• [sdiy] using 2 transformers   Harry Bissell & Nora
  • [sdiy] using 2 transformers   Seb Francis
• [sdiy] tempco resistors   David Brown
• [sdiy] OT: a new market? (cr78 programmer...)   Antonio Tuzzi
  • [sdiy] OT: a new market? (cr78 programmer...)   Adam Schabtach
    • [sdiy] OT: a new market? (cr78 programmer...)   dj hohum
      • Sv: Re: [sdiy] OT: a new market? (cr78 programmer...)   Daniel Araya
      • Sv: Re: [sdiy] OT: a new market? (cr78 programmer...)   Eduardo Saponara
• [sdiy] 12 bits D/A converter?   labolida
  • [sdiy] 12 bits D/A converter?   Mattias Rickardsson
• [sdiy] 12 bits D/A converter?   labolida
  • [sdiy] 12 bits D/A converter?   Eric Brombaugh
• [sdiy] Voltage controlled FPGA based synth?   Scott Gravenhorst
• [sdiy] Voltage controlled FPGA based synth?   Needham, Alan
• [sdiy] CQ Charlie Kerr   Ian Fritz
• [sdiy] 12 bits D/A converter?   Scott
  • [sdiy] 12 bits D/A converter?   René Schmitz
• [sdiy] Transformer question   Karl Ekdahl
  • [sdiy] Transformer question   Seb Francis
  • [sdiy] Transformer question   dj hohum
• Sv: Re: [sdiy] Transformer question   Daniel Araya
• Sv: Re: [sdiy] Transformer question   Harry Bissell & Nora
• [sdiy] 12 bits D/A converter?   labolida
• [sdiy] Button Cover   Scott
  • [sdiy] Button Cover   Tom Wiltshire
• [sdiy] Substituting op-amps   dj hohum
  • [sdiy] Substituting op-amps   Jason Proctor
• [sdiy] Substituting op-amps   dj hohum
• [sdiy] FCOS: Large Steel Rack Cases   dj hohum
• [sdiy] More old chips...BA651/BA652   dj hohum
  • [sdiy] More old chips...BA651/BA652   Peter Blackett
    • [sdiy] More old chips...BA651/BA652   dj hohum
      • [sdiy] I need some help with an electronics project!   Future Image
• [sdiy] Best way to interface 3V and 5V logic ICs on the same circuit ?   jbv
  • [sdiy] Best way to interface 3V and 5V logic ICs on the same circuit ?   Rainer Buchty
  • [sdiy] Best way to interface 3V and 5V logic ICs on the same circuit ?   John Speth
  • [sdiy] Best way to interface 3V and 5V logic ICs on the same circuit ?   René Schmitz
    • [sdiy] Best way to interface 3V and 5V logic ICs on the same circuit ?   Roy J. Tellason
• [sdiy] If I'd consider making a PCB for a flanger ...   JH.
  • [sdiy] If I'd consider making a PCB for a flanger ...   Fred Weed
  • [sdiy] If I'd consider making a PCB for a flanger ...   Seb Francis
    • MN3002 Re: [sdiy] If I'd consider making a PCB for a flanger ...   JH.
      • MN3002 Re: [sdiy] If I'd consider making a PCB for a flanger ...   Seb Francis
  • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Samppa Tolvanen
    • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Seb Francis
  • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Tim Parkhurst
  • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Buck Buchanan
    • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Tom Wiltshire
      • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Seb Francis
      • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Buck Buchanan
      • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   JH.
      • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Seb Francis
      • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Colin f
• [sdiy] Fat Controller firmware update   Seb Francis
• [sdiy]'plasma' vu-meter   Brett Maddaford
• [sdiy] sounddoctorin.com and global synth resource now active   Bob Weigel
• [sdiy] If I'd consider making a PCB for a flanger ...   jean-pierre.desrochers at ville.quebec.qc.ca
• [sdiy] TCA350   Bert Vermeulen
• [sdiy] TGTSH boards gone   Ian Fritz
• [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Harry Bissell & Nora
  • [sdiy] Re: [AH] If I'd consider making a PCB for a flanger ...   Buck Buchanan
• [sdiy] Low current power supply?   dj hohum
  • [sdiy] Low current power supply?   Paul Schreiber
    • [sdiy] Low current power supply?   dj hohum
      • [sdiy] Low current power supply?   dj hohum
  • [sdiy] Low current power supply?   John Luciani
    • [sdiy] Low current power supply?   dj hohum
• [sdiy] Low current power supply?   Brett Maddaford
• [sdiy] Low current power supply?   Needham, Alan
  • [sdiy] Low current power supply?   dj hohum
• [sdiy] Jerkster boards gone   Ian Fritz
• [sdiy] Low current power supply?   Needham, Alan
  • [sdiy] Low current power supply?   dj hohum
• [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   Julian
  • [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   Tim Parkhurst
    • [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   Julian
      • [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   Tim Parkhurst
    • [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   John Mahoney
    • [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   Oakley Sound
      • [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   Julian
      • [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   Fernando de Izuzquiza
      • [sdiy] Projects - 1 down (korg ms20 restoration) / 643 to go...   Samppa Tolvanen
• [sdiy] BA6110   Scott
  • [sdiy] BA6110   Samppa Tolvanen
• [sdiy] BA6110 - now search is working..   Scott
• [sdiy] Emil Helbro C.Q.   Ray Wilson
• [sdiy] Mouser part number for mixer pots?   Sam Ecoff
  • [sdiy] Mouser part number for mixer pots?   Anthony Rolando
• [sdiy] OT PC software for Roland PMA-5 ?   Doug Forbes
• [sdiy] MB808 TR808 clone   Keith Winstanley
  • [sdiy] MB808 TR808 clone   Louis van Dompselaar
  • [sdiy] MB808 TR808 clone   Doug Wellington
• [sdiy] MB808 TR808 clone   Keith Winstanley
  • [sdiy] MB808 TR808 clone   Dino Leone
• [sdiy] MB808 TR808 clone   Keith Winstanley
  • [sdiy] MB808 TR808 clone   Doug Wellington
    • [sdiy] MB808 TR808 clone   Jeff Farr
  • [sdiy] MB808 TR808 clone   Jeff Farr
• [sdiy] Good switch source?   dj hohum
  • [sdiy] Good switch source?   Tim Parkhurst
    • [sdiy] How do I unsubscribe from the list ?   Gil W.
      • [sdiy] How do I unsubscribe from the list ?   John Speth
    • [sdiy] Good switch source?   Jim Patchell
      • [sdiy] Good switch source?   Tom Arnold
    • [sdiy] Good switch source?   Tom Arnold
      • [sdiy] Good switch source?   Suit & Tie Guy
      • [sdiy] Good switch source?   Tim Parkhurst
      • [sdiy] Good switch source?   Phil Wheeler
      • [sdiy] Good switch source?   Suit & Tie Guy
• [sdiy] Save Emulatorarchive.com   Jorn Bilse
  • slightly OT: Emax2 OS (Re: [sdiy] Save Emulatorarchive.com)   m.j.kulengosky
• [sdiy] WinAVR   Jim Patchell
  • [sdiy] aluminum joystick handles   Fernando de Izuzquiza
    • [sdiy] aluminum joystick handles   Henry Till
  • [sdiy] WinAVR   Tim Parkhurst
  • [sdiy] WinAVR   Neil Johnson
• [sdiy] speaker to line out conversion   Video Synth
  • [sdiy] speaker to line out conversion   Paul Perry
    • [sdiy] speaker to line out conversion   Roy J. Tellason
      • [sdiy] speaker to line out conversion   dj hohum
• [sdiy] It's been a good week   Keith Winstanley
  • [sdiy] It's been a good week   Tim Parkhurst
  • [sdiy] It's been a good week   Doug Wellington
• [sdiy] It's been a good week   Keith Winstanley
• [sdiy] It's been a good week   Keith Winstanley
  • [sdiy] It's been a good week   Doug Wellington
  • [sdiy] It's been a good week   Doug Wellington
• [sdiy] It's been a good week   Keith Winstanley
• [sdiy] It's been a good week   Keith Winstanley
• [sdiy] plasma VU-meter episode 2 : The stereo come back!   m.bareille at free.fr
• [sdiy] Minisonic   Fernando de Izuzquiza
  • [sdiy] Minisonic   Tim Parkhurst
• [sdiy] Bizzare Solina Problem   Michael Ruberto
  • [sdiy] Bizzare Solina Problem   Michael Ruberto
• [sdiy] A6462D datasheet anyone?   Michael Ruberto
  • [sdiy] A6462D datasheet anyone?   Takuya Katayama
    • [sdiy] A6462D datasheet anyone?   Michael Ruberto
      • [sdiy] A6462D datasheet anyone?   Takuya Katayama
• [sdiy] Minisonic   Ken Stone
• EN72 Timbre Modulator (was: Re: [sdiy] Minisonic)   Fernando de Izuzquiza
  • EN72 Timbre Modulator (was: Re: [sdiy] Minisonic)   Tim Parkhurst
    • EN72 Timbre Modulator (was: Re: [sdiy] Minisonic)   Ian Fritz
• [sdiy] ARP Odyssey capacitors   Nicholas Gregorich
  • [sdiy] ARP Odyssey capacitors   Bob Weigel
    • [sdiy] ARP Odyssey capacitors   Roy J. Tellason
  • [sdiy] ARP Odyssey capacitors   Roy J. Tellason
    • [sdiy] ARP Odyssey capacitors   Nicholas Gregorich
      • [sdiy] ARP Odyssey capacitors   Paul Perry
      • [sdiy] ARP Odyssey capacitors   Nicholas Gregorich
      • [sdiy] ARP Odyssey capacitors   Roy J. Tellason
• [sdiy] [OT] spam-blocker?   Colin Hinz
  • [sdiy] [OT] spam-blocker?   Seb Francis
    • [sdiy] [OT] spam-blocker?   Colin Hinz
• [sdiy] TC resistor value changes?   dj hohum
  • [sdiy] TC resistor value changes?   Samppa Tolvanen
  • [sdiy] TC resistor value changes?   JAMES GALLANT
  • [sdiy] TC resistor value changes?   René Schmitz
• [sdiy] Interest in Synthacon VCF PCB?   Michael Ruberto
  • [sdiy] Interest in Synthacon VCF PCB?   Michael Ruberto
    • [sdiy] Interest in Synthacon VCF PCB?   Michael Ruberto
• [sdiy] [OT] spam-blocker?   Colin Hinz
• [sdiy] [OT] spam-blocker?   Colin Hinz
• Re: [sdiy] Portable cabinet́s lids   Dump Static
• [sdiy] Making Cables   Scott
  • [sdiy] Making Cables   David Moylan
• [sdiy] Making Cables   Bruce
• [sdiy] Making Cables   Scott
• [sdiy] YC45D service manual PDF for everyone   Loscha
• [sdiy] digital potentiometers as "volume" control   Tom Haber
  • [sdiy] digital potentiometers as "volume" control   dj hohum
  • [sdiy] digital potentiometers as "volume" control   Jay Schwichtenberg
    • [sdiy] Question on using EAGLE for Front panel designs   Anthony Rolando
      • [sdiy] Question on using EAGLE for Front panel designs   Tom Arnold
      • [sdiy] Question on using EAGLE for Front panel designs   Anthony Rolando
      • [sdiy] Question on using EAGLE for Front panel designs   Neil Johnson
      • [sdiy] Question on using EAGLE for Front panel designs   John Luciani
      • [sdiy] Question on using EAGLE for Front panel designs   Bert Vermeulen
      • [sdiy] Question on using EAGLE for Front panel designs   Anthony Rolando
      • [sdiy] Question on using EAGLE for Front panel designs   Nicholas Gregorich
      • [sdiy] Question on using EAGLE for Front panel designs   Anthony Rolando
• [sdiy] Question on using EAGLE for Front panel designs   jays at aracnet.com
• [sdiy] Seeking Info On Damon modules   Tom Rose
• [sdiy] Question on using EAGLE for Front panel designs   Byron G. Jacquot
• [sdiy] Pacific Northwest Synthesizer Meeting   John L Marshall
  • [sdiy] Pacific Northwest Synthesizer Meeting   Jim Patchell
  • [sdiy] Pacific Northwest Synthesizer Meeting   Toby Paddock
    • [sdiy] Pacific Northwest Synthesizer Meeting   John Mahoney
• [sdiy] Seeking Info On Damon modules   Needham, Alan
• [sdiy] Question on using EAGLE for Front panel designs   flightofharmony at comcast.net
• [sdiy] current question   John Mahoney
  • [sdiy] current question   harrybissell at wowway.com
    • [sdiy] current question   John Mahoney
      • [sdiy] current question   Gene Stopp
      • [sdiy] current question   John Mahoney
      • [sdiy] current question   harrybissell at wowway.com
      • [sdiy] current question   Tom Wiltshire
      • [sdiy] current question   harrybissell at wowway.com
  • [sdiy] current question   Tim Daugard
  • [sdiy] current question   ASSI
• [sdiy] Fwd: Out of Office AutoReply   John Mahoney
• [sdiy] Bent Items   DrHeqx
  • [sdiy] Bent Items   Todd Sines
    • [sdiy] Bent Items   DrHeqx
  • [sdiy] Bent Items   dj hohum
  • [sdiy] Bent Items (links)   peter edwards
• [sdiy] current question   harrybissell at wowway.com
• [sdiy] Non-linear synthesis   Tom Wiltshire
• [sdiy] CD4053B Pinout   Kyle Stephens
  • [sdiy] CD4053B Pinout   John Mahoney
• [sdiy] ghielmetti matrix grounding   Derek Holzer
• [sdiy] ghielmetti matrix grounding   Ken Stone
• [sdiy] Filter Frequency response measurement ?   dj hohum
  • [sdiy] Filter Frequency response measurement methods ?   Peter Blackett
    • [sdiy] Filter Frequency response measurement methods ?   Paul Perry
    • [sdiy] Filter Frequency response measurement methods ?   Adam Schabtach
  • [sdiy] Filter Frequency response measurement ?   Roy J. Tellason
• [sdiy] Filter Frequency response measurement ?   Needham, Alan
  • [sdiy] Filter Frequency response measurement ?   dj hohum
• [sdiy] Oscar schematics   Heiko van der Linden
• [sdiy] Filter Frequency response measurement ?   Needham, Alan
  • [sdiy] Filter Frequency response measurement ?   dj hohum
• [sdiy] KorgMS20 mods? help?   peter edwards
  • [sdiy] KorgMS20 mods? help?   Greg James
  • [sdiy] KorgMS20 mods? help?   dj hohum
    • [sdiy] KorgMS20 mods? help?   peter edwards
      • [sdiy] KorgMS20 mods? help?   dj hohum
      • [sdiy] KorgMS20 mods? help?   Anthony Rolando
      • [sdiy] KorgMS20 mods? help?   harrybissell at wowway.com
• [sdiy] Rwilson EG trouble   Scott
  • [sdiy] Rwilson EG trouble   Tim Parkhurst
• [sdiy] demuxing 4017 inputs   bill bigrig
  • [sdiy] demuxing 4017 inputs   dj hohum
  • [sdiy] demuxing 4017 inputs   Tim Parkhurst
    • [sdiy] demuxing 4017 inputs   Veronica Merryfield
      • [sdiy] demuxing 4017 inputs   Roy J. Tellason
  • [sdiy] demuxing 4017 inputs   Tom Bugs
• [sdiy] E112 and E101 FETs   Keith Winstanley
  • [sdiy] E112 and E101 FETs   Takuya Katayama
• [sdiy] MagicSmoke Mankato filter PCB built   David Brown
• [sdiy] Non-linear synthesis   labolida
• [sdiy] rwilson EG trouble- half fixed   Scott
• [sdiy] E112 and E101 FETs   Keith Winstanley
  • [sdiy] E112 and E101 FETs   Paul Perry
• [sdiy] 1/4" Switchcraft style jacks for sale   Bruce Duncan
• [sdiy] Wanted: Multibus (late 70s microprocessor bus) extender card   Steve Lenham

Last message date: Tue Jul 31 23:30:06 CEST 2007
Archived on: Tue Jul 31 23:27:30 CEST 2007

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...