[sdiy] WinAVR

[Tim Parkhurst]

On 7/20/07, Jim Patchell <patchell at cox.net> wrote:
> I know there are quite a few others on the list that use the AVR in
> their synthesizers, and this email is mostly for them or anybody who is
> thinking about starting to use the AVR...
>
> I have been using the AVR since about 2001.  I have been, up until now,
> using the ImageCraft C compiler.  It is a very nice compiler, but it can
> cost a couple hundred bucks.
>
> I have switch over to using WinAVR (this is a GNU tool...just search for
> WinAVR...you will find it...it is on sourceforge ).  When you consider
> that this tool is free, and it has a very high level of
> performance...well, if you have been wanting to use a C compiler, now is
>  the time.
>
> It integrate in real nice with AVR Studio (you will want to get 4.13 if
> you haven't already done so).
>
> http://www.noniandjim.com/Jim/uproc/avr.html
>
> -Jim
>

Nice! Thanks for sharing!


Tim (plays well with others, but not with udders) Servo
-- 
"Imagination is more important than knowledge." - Albert Einstein