Sv: Re: [sdiy] Transformer question

[Harry Bissell & Nora]

If it has a true 'center tap'  (three terminals, not four) you can't
get the phase right...

H^) harry

Harry Bissell loves Nora Abdullah
Married Nov 6th 2006

--- daniel.araya at sr.se wrote:

From: "Daniel Araya" <daniel.araya at sr.se>
To: <synth-diy at dropmix.xs4all.nl>
Subject: Sv: Re: [sdiy] Transformer question
Date: Fri, 13 Jul 2007 22:24:28 +0200

or you could just parallell the taps (considering phase of course) to get 12V, 1A.


/d

>>> Seb Francis <seb at burnit.co.uk> 07-07-13 21:09 >>>
You can just make it into a single +12V 1A power supply if you want.  
Just full wave rectifier with 2 diodes.  The centre tap is your 0V.

You'll need a largish heatsink because your regulator will be 
dissipating Voltage Drop * Current watts of heat.

Seb



Karl Ekdahl wrote:
> Hi list. I have a transformer that's 15V-0-15V @
> 500mA, now i could easily make a +-12V @ 500mA supply
> out of this but i don't need a negative rail - what i
> do need is current. So, could i make this into two
> separate +12V supplies @ 500mA each? I'm thinking that
> the power and heat generated should be the same, no? 
>
> Thanks
>
> Karl
>
>
>       __________________________________________________________
> Fly(g) från regnet - sök efter resor hos Yahoo! Shopping.
> Jämför pris på flygbiljetter och hotellrum här:
> http://shopping.yahoo.se/b/a/c_169901_resor_biljetter.html?partnerId=96914052
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
>   

_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy


_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy