[sdiy] ceramic capps and their voltages?

[Laurie Biddulph]

A simpler way than `blowing them up'. Look in, say, the Farnell catalogue. 
You will find that voltages are pretty consistent for any one given size. As 
most are 50V or above we don't normally concern ourselves but if you NEED to 
know because you have a specifically high voltage then you could try the 
other suggestion......
0603 typically 50V
0805 typically 50V but 25V and 10V for some VERY large values
1206 100V but 16V and 25V for some LARGE values

Best Regards

(Mr) Laurie Biddulph
Phone: +61 (0)2 4340 0938
Mobile: 0400 257 645

Elby Designs
ABN: 70 022 727 605
http://www.elby-designs.com

This e-mail and any files transmitted with it are confidential and intended 
for the addressee only.
If you are not the addressee you may not copy, forward, disclose or 
otherwise use it, or any part of it, in any form whatsoever. If you have 
received this e-mail in error please notify the sender and ensure that all 
copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the 
author and do not necessarily represent those of Elby Designs.
Although this e-mail and its attachments have been scanned for the presence 
of computer viruses, Elby Designs will not be liable for any losses as a 
result of any viruses being passed on.

----- Original Message ----- 
From: "karl dalen" <dalenkarl at yahoo.se>
To: <synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, February 27, 2007 10:58 AM
Subject: [sdiy] ceramic capps and their voltages?


> Is there any method to figuring out what voltage a ceramic cappacitor has?
> A 1206 220n for instance.
> I have a bag of quality ceramics here but no number, nothing!
> Just a mass of brown with tinned ends.
>
> KD
>
>
>
>
>
> _________________________________________________________
> Flyger tiden iväg? Fånga dagen med Yahoo! Mails inbyggda
> kalender. Dessutom 250 MB gratis, virusscanning och antispam. Få den på: 
> http://se.mail.yahoo.com
>