[sdiy] Tempco 5.1 k 3000 PPM/K (Was: low-k ceramic capacitor?)

[Mike]

There ia an interesting note on using a Panasonic ERA-S33J102V surface mount
resistor fot tempco in an XR2207 based VCO here:

http://www.cim.mcgill.ca/%7eclark/diy/jjclark_2207_vco.html

I really like his idea of gluing it on top of teh Dual transistor. I've
since thought of doing the same with an SSM flat pack dual, and putting the
tempco underneath the chip, so it was just touching the package.
He's got a some other interesting stuff here too:

http://www.cim.mcgill.ca/%7eclark/emusic.html

HTH

||\/||ike
----- Original Message ----- 
From: "Jeff Farr" <moogah at gmail.com>
To: "sdiy" <synth-diy at dropmix.xs4all.nl>
Sent: Friday, February 09, 2007 1:48 AM
Subject: Re: [sdiy] Tempco 5.1 k 3000 PPM/K (Was: low-k ceramic capacitor?)


> Farnell in the UK is the only place I know of that carries the 5.1k
tempco's
>
> On 2/8/07, Andre Majorel <aym-htnys at teaser.fr> wrote:
> > On 2007-02-08 16:26 -0600, drew meyer wrote:
> >
> > > one more thing,  what should i look for if i want a 3300ppm/c
> > > resistor at 5k1?  i searched 3300 ppm at mouser and i didn't
> > > come up with anything.
> >
> > All the links I've gathered on the subject :
> >
> >   http://www.teaser.fr/~amajorel/sourcing/
> >
> > IIRC, Digi-Key have other values. They may have the 5.1 k you're
> > looking for.
> >
> > --
> > André Majorel <URL:http://www.teaser.fr/~amajorel/>
> > Do not use this account for regular correspondence.
> > See the URL above for contact information.
> >
>
>