[sdiy]: a good panel partner for Analog Shift Register

[Jason Proctor]

when i built my ASR, i included two of the bissell morph-lag boards 
normalled to the first two shifter outputs. worked pretty well as a 
2U MOTM panel.

hth

>I have one of Ken Stone's Analog Shift Registers. I made a Frac 
>Panel layout for it, but there is plenty of room for features or 
>even another small circuit.
>
>I already added an additional input to the shift register (for 
>feedback or mixing cvs at the input). I have about half of the 1U 
>Frac panel open.
>
>My initial idea was to put a simple OR circuit in there so that I 
>could mix clock/ trigger/ gate signal to feed the ASR (having that 
>normalled to the clock input on the ASR).
>
>Any other suggestions? Features to add to the ASR or circuits that 
>would be useful with the ASR?
>
>I have never used an ASR so I really have few ideas what might be 
>good to include.
>
>Thanx,
>
>tony
>_________________________________________________________________
>Share life as it happens with the new Windows Live.
>http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_122007
>_______________________________________________
>Synth-diy mailing list
>Synth-diy at dropmix.xs4all.nl
>http://dropmix.xs4all.nl/mailman/listinfo/synth-diy