[sdiy] USB o-scope - just FYI

[Needham, Alan]

http://www.bitscope.com/ do a couple of models

http://www.picotech.com/ produce the PicoScope

	Alan


-----Original Message-----
From: synth-diy-bounces at dropmix.xs4all.nl
[mailto:synth-diy-bounces at dropmix.xs4all.nl] On Behalf Of Steffen Juul
Sent: 16 December 2007 15:50
To: Tim Parkhurst
Cc: Synth-DIY
Subject: Re: [sdiy] USB o-scope - just FYI


On 20/08/2007, at 1.59, Tim Parkhurst wrote:

> Although there's no substitute for a good dedicated oscilloscope, for
> $169 this might be a pretty handy tool

Cheaper then the Syscomp (www.syscompdesign.com) but the GUI is only  
for win32 and not open-source. Are there other usb-scopes out there  
that follow the Syscomp model?
_______________________________________________
Synth-diy mailing list
Synth-diy at dropmix.xs4all.nl
http://dropmix.xs4all.nl/mailman/listinfo/synth-diy

_____________________________________________________________________
The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it. It may contain information which is confidential and/or covered by legal professional or other privilege (or other rules or laws with similar effect in jurisdictions outside England and Wales).
The views expressed in this email are not necessarily the views of Centrica plc, and the company, its directors, officers or employees make no representation or accept any liability for its accuracy or completeness unless expressly stated to the contrary.

Centrica plc

Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD

Registered in England and Wales No 3033654