[sdiy] Prophet 5: +5v drops to +4v
Gil W.
gil_we at yahoo.com
Fri Dec 7 01:47:37 CET 2007
Solved,
There seem to be a bad contact between the wires
connecting the PS to the 5.6v input on the main board.
Once I fixed that, the +5.47v is back.
I could play the Prophet for a few hours now with no
issues...
Thanks !
--- "Gil W." <gil_we at yahoo.com> wrote:
> Hi all !
>
> Really need your help on this, thanks in advance...
>
> After building a powersupply to my Prophet 5 rev.
> 3.2,
> and having it working just fine two days ago,
> getting
> correct voltages, I decided to try to connect CPU
> fans
> to the power supply so I can cool the heatsink down.
>
> I used two 5v CPU fans and connected them in
> parallel
> with the 5.6v powersupply rail.
>
> >From that very point, and also after I took the
> fans
> out of the circuit, I'm no longer getting 5v in the
> main board, but rather than that - I get about
> 4.10v-4.00v !! When checking the voltage across the
> 5.6v power supply rail, it first shown about 5.30v
> and
> then dropped to 5.00v and even below that...
>
> Will anybody help me with where to look at ??
>
> Is it likely that I damaged an IC on the main board
> ?
> or did I damage anything on the power supply itself
> ?
>
> One note:
>
> When I disconnect the 1N4002 diode which goes across
> the +5.6v input and the +5v main board rail, the
> powersupply shows correct 5.6v ...
>
> Really need your help on that one... Thanks !!!
>
>
>
>
____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
>
> _______________________________________________
> Synth-diy mailing list
> Synth-diy at dropmix.xs4all.nl
> http://dropmix.xs4all.nl/mailman/listinfo/synth-diy
>
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
More information about the Synth-diy
mailing list